Bedienungsanleitung Triax DVB T1 Twin (Seite 40 von 47) (Deutsch, Englisch)

485389

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Press the "EPG" button on the remote control to launch the "Electronic Program Guide" (EPG).

Select the broadcast you want to record with the buttons and press the green button "Timer".

Confirm your selection by pressing OK when the window "EPG Recording" is displayed. The

selected program is scheduled for recording and appears in the recording list.

To modify this entry manually, you can open the menu by pressing OK and edit the entry.

If your VCR can be controlled remotely by switching voltage, the recording will be initiated by the

STB as long as connectivity is a given and the corresponding settings on the VCR have been

made.

For VCRs without this function, you will have to schedule the recording using the recording timer

of the VCR and add a few minutes buffer time before and after the start and end of the

broadcast.

The following sections, "Setting the Timer" and "EPG Recording", will provide more information

about how to set the timer of this STB. Depending on the VCR model, you might have to

manually add a generous time tolerance when setting the timer. Please note that the VCR needs

to be set up to use the "External Video Input" mentioned above.

To perform a direct recording (instantly), you can start the recording function on the VCR

manually and switch the STB into recording mode by pressing the REC button.

You can stop a direct recording in progress at any given time. If you press REC_TIME on the

remote control of the STB, a window will be displayed where either the desired time to stop the

recording or the duration of the recording can be entered using the numeric keys. If the VCR

cannot be controlled via switching voltage, you must stop the recording in accordance with the

instructions of the manual.

8.5 EPG Recording

"EPG Recording" is the most convenient and simple way to schedule a recording.

8.4 Setting the Timer

Press the TIMER (Green) button on the remote control.

Select an empty slot in the "Recording List" displayed with

the buttons and press OK.

You can enter the necessary information in the next screen

"Recording Settings".

Be sure to enter the duration of the recording, not the time

when the recording should be stopped.

Complete the entry by pressing OK.

In "Recording List" you can check all entries.

You can edit previously entered recording data by selecting

the corresponding position in the "Recording List" with the

- buttons. Pressing OK in the "Recording List" will display

the screen "Recording Settings". Input the changes and

confirm by pressing OK.

To delete an entry, select the corresponding event with the

- buttons in "Recording List" and press button. Confirm

by pressing OK, or cancel the deletion by pressing Exit when

the confirmation request is displayed.

Note:

A special window will display a message that a recording is due to start in one minute. Confirm by

pressing OK, or cancel the scheduled recording by pressing Exit.

The recording timer can be set manually or automatically using the EPG ("Electronic Program

Guide"). This section outlines the manual data input, editing of entries and deletion of a scheduled

recording. The next section provides information about "EPG recording".

DVB T1 TWIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triax DVB T1 Twin Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info