Bedienungsanleitung Triax DVB T1 Twin (Seite 42 von 47) (Deutsch, Englisch)

485389

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

You can delete the letters of the previous name with the (-) button on the remote control one by

one.

Use the buttons and to select the letters for the new name and confirm each time by

pressing OK.

You can enter numbers using the numeric buttons.

After completing the entry, confirm the new name by pressing the RED button.

9.9 Selecting Languages (Menu, Sound, Subtitle)

You can select the Language for menus and the main language for Sound and Subtitles from

several options in the menu "General Settings". The software version of the receiver determines

the available languages; the selection might differ among different countries.

9.8 Edit Channel Name

If you would like to change or amend the names of TV or radio stations in the program lists ("Total

List" or "Favorites List") you can do so in "3. Edit Program Name" in the menu, "Favorite List

Manager". Select the corresponding program list with the buttons and launch it by pressing

OK. Select the name to be edited with the buttons and press OK.

Go to "Favorite List Manager" and select "Remove Channels from Total List".

Select unwanted channel(s) with the buttons and OK.

Shift selected channel(s) into the trash can "Recycled", using the button.

Press GREEN button to move to the trash can "Recycled".

Press OK to shift back channels from trash can to the "Total List", if needed.

Press EXIT to delete all channels from the trash can. A warning message appears. Press OK for

delete, press EXIT to cancel the delete process.

9.7 Delete Channels from Total List

When performing an "Automatic Search" also some unwanted channels may be caught. To delete

individual channels from the "Total List" :

9.5 Auto Search Function

When you set up your receiver for the first time, an "Auto

Search" process will start automatically. If it should fail for

some reasons or you wish to search for new TV channels,

please follow the steps listed below.

Select "Auto Search" in the "Channel Manager" menu and

then press the OK button.

TV (and radio broadcast channels, if available) will be

searched.

The names of the found channels will be listed.

After the search process has been finished, the unit automatically turns to normal TV viewing

mode.

Select "Manual Search" in the "Channel Manager" menu and

then press the OK button.

Select the multiplexes (TV channel packages) you want to

search, using the buttons and OK.

After the settings are completed, press the RED button to start "Manual Search".

The names of the found channels will be listed.

After the search process has been finished, the unit automatically turns to normal TV viewing

mode.

9.6 Manual Search Function

Use this channel search by entering the multiplex information

manually to the receiver. This channel search is often used to

search for a particular channel or those channels that "Auto

Search" has missed, but it requires comparatively more

expertise.

DVB T1 TWIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triax DVB T1 Twin Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info