Bedienungsanleitung Triton TBJ001 (Seite 8 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

665071

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Protect your hands

• Do not allow hands to get close to the cutting wheel or blades. Use a suitable push stick for

shorter workpieces with appropriate power tools

Be aware of others around you

• It is the responsibility of the user to ensure that other people in the vicinity of the work area

are not exposed to dangerous noise or dust and are also provided with suitable protective

equipment

Hidden objects

• Inspect the workpiece and remove all nails and other embedded objects before cutting

• Do not attempt to cut material that contains embedded objects unless you know that the

cutting tool ﬁtted to your machine is suitable for the job

• Walls may conceal wiring and piping, car body panels may conceal fuel lines, and long

grass may conceal stones and glass. Always check the work area thoroughly before

proceeding

Beware of projected waste

• In some situations, waste material may be projected at speed from the cutting tool. It is the

user’s responsibility to ensure that other people in the work area are protected from the

possibility of projected waste

Fitting cutting tools

• Ensure cutting tools are correctly and securely ﬁtted and check that wrenches / adjusters

are removed prior to use

• Only use cutting tools recommended for your machine

• Do not attempt to modify cutting tools

• Ensure blades are sharp, in good condition and correctly ﬁtted

• Do not attempt to resharpen blades that are not suitable for resharpening; these may

include specially hardened blades or blades made from hardened alloys typically containing

tungsten

• Blades that can be resharpened should be resharpened only according the blade

manufacturer’s instructions. These may include a limited number of times the blade can be

resharpened

• Sharpened blades should be more thoroughly inspected before use and replaced

immediately if there is any doubt about their condition and suitability for use

• In the event blades encounter an embedded object in use that the blades are not suitable

for, blades should be replaced immediately

Direction of feed

• Always feed work into the blade or cutter against the direction of movement of the blade or

cutter

Beware of heat

• Cutting tools and workpieces may become hot in use. Do not attempt to change tools until

they have been allowed to cool completely

Control dust / swarf

• Do not allow dust or swarf to build up. Sawdust is a ﬁre hazard, and some metal swarf is

explosive

• Be especially careful when cutting wood and metal. Sparks from metal cutting are a

common cause of wood dust ﬁres

• Where possible, use a dust extraction system to ensure a safer working environment

Product Familiarisation

1. Auxiliary Handle

2. Spindle Lock Button

3. Direction Indicator

4. Angle Lock

5. Face Centre Indicator

6. Fence Biscuit Edge Indicator (L)

7. Fence Blade Centre Indicator

8. Fence Biscuit Edge Indicator (R)

9. Non-Slip Pad

10. Depth Indicator

11. Turret Stop

12. Base

13. Depth Stop

14. Depth Stop Locking Nut

15. Dust Port

16. Motor Vent

17. On/Off Trigger Switch

18. Main Handle

19. Face

20. Handle Screws (x 4)

21. Blade Access Knob

22. Auxiliary Handle Bolt (x 2)

23. Click Stop (0°,45° & 90°)

24. Angle Scale

25. Angle Indicator

26. Centre Blade Indicator

27. Fence Height Scale

28. Blade Slot

29. Fence Locking Knob

30. Fence

31. Base Lid

32. Saw Blade

33. Threaded Blade Flange

34. Blade Tooth Tip

35. Direction Indicator

Accessories (not shown): pin spanner, dust bag, hex key & case

Intended Use

Portable hand-held mains-operated power tool with a small circular saw blade that cuts slots

into wood to create joints suitable for inserting various sizes of wood biscuits.

329697_Z1MANPRO1.indd 8 29/11/2016 17:03

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triton TBJ001 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info