Bedienungsanleitung Triton TRTA 001 (Seite 4 von 30) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

664982

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

General Safety

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, ﬁre and/or serious injury.

WARNING: This appliance is not intended for use by persons (including children) with

reduced, physical or mental capabilities or lack of experience or knowledge unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety. Children must be supervised to ensure that they do not play

with the appliance.

Save all warnings and instructions for future reference.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases or dust.

c) Keep children and bystanders away while operating a powered tool. Distractions can

cause you to lose control.

2) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a

powered tool. Do not use a powered tool while you are tired or under the inﬂuence

of drugs, alcohol or medication. A moment of inattention while operating a powered tool

may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position when not

operating the tool and make use of other safety features which prevent unintentional

starting

d) Remove any adjusting key or wrench before turning the powered tool on. A wrench

or a key left attached to a rotating part of the tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better

control of the tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in

moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce

dust-related hazards.

WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,

tingling and reduced ability to grip. Long term exposure can lead to a chronic condition.

If necessary limit the length of time exposed to vibration. Use the ﬁgures provided in the

speciﬁcation relating to vibration if provided to calculate the duration and frequency of

operating the tool. The 2002/44/EC directive relating to vibration in the workplace may provide

useful information even for domestic use of tools. In the ﬁrst instance of feeling uncomfortable

due to vibration STOP using the tool immediately.

WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the

time of exposure if necessary. If sound levels are uncomfortable even with ear protection stop

using the tool immediately and check the ear protection is correctly ﬁtted and provides the

right level of sound attenuation for the level of sound produced by your tool.

3) Tool use and care

a) Maintain tools. Check for misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the tool’s operation. If damaged, have

the tool repaired before use. Many accidents are caused by poorly maintained tools.

b) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

c) Use the tool’s accessories and tool bits etc. in accordance with these instructions,

taking into account the working conditions and the work to be performed. Use of the

tool for operations different from those intended could result in a hazardous situation.

4) Service

a) Have your tool serviced by a qualiﬁed repair person using only identical

replacement parts. This will ensure that the safety of the tool is maintained.

Product Familiarisation

1. Router Base Plate

2. Router Securing Holes

3. Macro Adjustment Knobs

4. Adaptor Body

5. Adjustment Locking Knob

6. Track Width Adjustment Screws

7. Micro Adjustment Screw

8. Base Plate Mounting Rails

Intended Use

• Accessory for Triton Precision Plunge Routers JOF001, MOF001 and TRA001 to attach

track lengths for making straight repeatable cuts in natural and composite woods.

Compatible with Triton Tracks TTSTP and TTST1500.

Unpacking Your Tool

• Carefully unpack and inspect your tool. Fully familiarise yourself with all its features and

functions

• Ensure that all parts of the tool are present and in good condition. If any parts are missing

or damaged, have such parts replaced before attempting to use this tool

Before Use

WARNING: ALWAYS disconnect from the power supply before ﬁtting accessories or making

adjustments

Router Track Adaptor assembly

• Slide the Base Plate Mounting Rails (8) through the openings below the Macro Adjustment

Knobs (3), which are situated on the Router Base Plate (1)

• Securely fasten the Macro Adjustment Knobs

Note: Ensure that the Base Plate Mounting Rails leave enough space to attach the plunge

router on the adaptor.

Plunge router attachment

1. Locate the two plunge router baseplate mounting knobs, and loosen them entirely. This

permits the mounting studs to engage the Router Securing Holes (2)

2. Turn both the plunge router and the Router Track Adaptor upside down

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about

the product or instructions on its use.

Thank you for purchasing this Triton tool. This manual contains information necessary

for safe and effective operation of this product. This product has unique features and,

even if you are familiar with similar products, it is necessary to read this manual

carefully to ensure you fully understand the instructions. Ensure all users of the tool

read and fully understand this manual.

Original Instructions

Introduction

Wear hearing protection

Wear eye protection

Wear breathing protection

Wear head protection

Wear hand protection

Read instruction manual

Caution!

Speciﬁcation

Model number: TRTA001

Adjustment: Macro/ Micro

Micro adjustment range: 0-13mm (0-33/64")

Track compatibility: Triton TTSTP, TTST1500

Router compatibility: JOF001, MOF001, TRA001

275634_Z1MANPRO1.indd 4 29/11/2016 10:49

Triton TRTA 001 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info