Bedienungsanleitung Triton TRTA 001 (Seite 5 von 30) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

664982

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

3. Press the baseplate mounting knobs on the plunge router inwards, to expose the mounting

studs (Image A)

4. Align the mounting studs with the Router Securing Holes on the Router Base Plate (1), and

slide into the keyhole slots (Image B)

5. Tighten the baseplate mounting knobs on the plunge router ﬁrmly to secure the plunge

router to the Router Track Adaptor

Track rail attachment

• Loosen the Adjustment Locking Knob (5) By turning it anticlockwise, before making

adjustments

• Fit the Adaptor Body (4) to the extruded guide rail on the track. Adjust the Track Width

Adjustment Screws (6) on the Adaptor Body using a hex key, to give a snug ﬁt

• Adjust the Track Rail Adaptor’s position using the Macro Adjustment Knobs (3), to ensure

the Router Base Plate (1) does NOT contact the track rail

• Turn the Micro Adjustment Screw (7) to position the plunge router accurately for cutting

• After adjustments have been made, lock the settings into place, by turning the Adjustment

Locking Knob clockwise

Note: The adjustment range is made using the extension from the Micro adjustment (see

‘Speciﬁcation’) and does not include the extension from the Macro Adjustment Knobs.

Operation

WARNING: ALWAYS read the manual supplied with your router before operation, and follow the

router manufacturers usage instructions and recommendations.

WARNING: ALWAYS use adequate protective equipment, including eye protection, respiratory

and hearing protection, when working with this tool.

Note: ALWAYS use clamps to secure your workpiece to the workbench wherever possible.

Note: For correct positioning of the Router track adaptor, (Image C).

Note: This router track adaptor should NOT be used close to the edge, or on the edge, of a

workpiece, as the router may become unstable and tip off the track.

• Conﬁrm that the tool and the workpiece are correctly supported, and guide the router and

the tool using both hands (Image D)

• For instructions about how to use the plunge router correctly, refer to the Triton plunge

router manual

WARNING: ALWAYS maintain a secure hold on the router whilst the machine is powered on

Guarantee

To register your guarantee visit our web site at

www.tritontools.com* and enter your details.

Your details will be included on our mailing list (unless indicated otherwise) for

information on future releases. Details provided will not be made available to any third

party.

Purchase Record

Date of Purchase: ___ / ___ / ____

Model: TRTA001 Retain your receipt as proof of purchase art pr

Triton Precision Power Tools guarantees to the purchaser of this product that if any

part proves to be defective due to faulty materials or workmanship within 3 YEARS

from the date of original purchase,

Triton will repair, or at its discretion replace, the faulty part free of charge.

This guarantee does not apply to commercial use nor does it extend to normal wear

and tear or damage as a result of accident, abuse or misuse.

* Register online within 30 days.

Terms & conditions apply.

This does not affect your statutory rights oves to be defecti

Problem Possible cause Solution

Uneven cut Loose fastener allowing movement between components

Ensure all fasteners are adequately tightened on Adaptor,

Track and Router

Guide rail movement when in operation Adjustment Locking Knob (5) not tightened securely

Tighten Adjustment Locking Knob to lock guide rails into

place after adjustment

Resistant or sticking sliding motion

Track Width Adjustment Screws (6) are too tight

Loosen Track Width Adjustment Screws until there is little

or no resistance

The track is insufﬁciently lubricated, or dust and other debris

has built-up on the track

Clean the track and apply PTFE spray or other forms of dry

lubricant to eliminate resistance

Troubleshooting

and ﬁtted to the track.

Accessories

• A range of accessories, including Tracks (TTST1500), Work Clamps (TTSWC) and Track

Connectors (TTSTC) are available from your Triton dealer. Spare parts can be purchased

from your Triton dealer or online at www.toolsparesonline.com

Maintenance

WARNING: ALWAYS disconnect from the power supply before carrying out any inspection,

maintenance or cleaning.

• This tool is manufactured using class-leading components and makes use of the latest in

intelligent engineering that protects the tool and its components. In normal use it should

provide a long working life

Cleaning

• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly,

and shorten the tool’s service life. Clean the body of your tool with a soft brush or dry

cloth. If available, use clean, dry, compressed air to blow through the ventilation holes

Storage

• Store this tool after use in a dry, secure place out of the reach of children

275634_Z1MANPRO1.indd 5 29/11/2016 10:49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triton TRTA 001 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info