Bedienungsanleitung Tronic KH 3033 (Seite 8 von 13) (Englisch)

464874

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

9 GB/IE/CY

Safety / Operation

and do not use the battery charger if you can-

not concentrate or feel unwell.

Product features

This appliance has been designed for charging a

variety of SLA batteries (sealed lead acid batteries),

as mainly used in cars, motorbikes and several other

vehicles. They may be of types e.g. WET (with liquid

electrolyte), GEL (with mit gel-type electolyte) or AGM

(absorbed glass mat) batteries. A special design of

the appliance (also named „three-phase-charging

strategy“) enables the recharging of the batttery to

almost 100 % of its original capacity. Connecting

the battery for a long period to the battery charger

is also a good way of ensuring that your battery is

kept in optimum condition.

Operation

WARNING!

Before you carry out any work

on the battery charger always pull the mains

plug out of the mains socket.

WARNING!

DANGER OF ELECTRIC

SHOCK! DANGER OF DAMAGE TO

PROPERTY! DANGER OF INJURY! Ensure

that you do not strike electrical cables, gas or

water pipes when you are drilling into the wall.

If necessary, check the wall using a suitable

detector before you drill.

j You may ﬁnd it convenient to attach the battery

charger on to a board or a wall. Screw the two

screws through the mounting holes

into the

board or wall.

Connection

j Before starting the charging or discharging

procedure on a permanently installed battery

in a vehicle, ﬁrst disconnect the minus pole con-

necting cable (black) of the vehicle from the

minus pole of the battery. The minus pole of the

battery is usually connected to the car body.

j Then disconect the plus pole connecting cable

(red) of the vehicle from the plus pole of the

battery.

j First attach the „+“ quick-release clamp (red)

of the battery charger to the „+“ terminal of the

battery (see Fig. C).

j Attach the „–“ quick-release clamp (black)

of the battery charger to the „–“ terminal of

the battery (see Fig. C).

j Connect the mains lead

of the battery

charger to an electrical power outlet socket.

Disconnecting

j Disconnect the appliance from the power supply.

j Detach the „–“ quick-release clamp (black)

from the „–“ terminal of the battery.

j Detach the „+“ quick-release clamp (red)

from the „+“ terminal of the battery.

j Reconnect the plus pole connecting cable of

the vehicle to the plus pole of the battery.

j Reconnect the minus pole connecting cable of

the vehicle to the minus pole of the battery.

Select charging mode

You can select diﬀerent charging modes for charging

diﬀerent batteries at diﬀerent ambient temperatures.

In comparison with conventional battery charging

stations, this appliance has a special function for

reusing an empty battery or rechargeable battery.

You can recharge an empty battery / rechargeable

battery. Safe charging is ensured by means of a

protection function against incorrect connection and

short circuiting. Due to the installed electronics, the

charging station does not begin operation directly

after connecting the battery, but only starts after a

charging mode has been selected.

This avoids sparking, which often occurs when

connecting. The battery charger is controlled by an

internal MCU (Micro-Computer Unit).

33211_Battery charger_Content_LB6.indd 9 24.06.09 10:30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tronic KH 3033 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tronic KH 3033

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info