688812
12
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
12 EN
local air conditioner PAC 2010 E / PAC 2610 E
Operation
Avoid open doors and windows.
Operating elements
23
12
13
14
15
16
18
17
19
20
21
22
No. Designation Function
12 Minus arrow button For decreasing the target
temperature (16°C to 30°C) or
the number of hours of the timer
(0.5h to 24h)
13 Segment display Indication of the target
temperature in cooling mode
Indication of the number of hours
during timer programming
Indication of the error code, see
chapter Errors and faults
°C / °F indication
14 Plus arrow button For increasing the target
temperature (16°C to 30°C) or
the number of hours of the timer
(0.5h to 24h)
15 Operating mode
LED
Indicates the selected operating
mode:
Cool= cooling
Dry= dehumidification
Fan= ventilation
16 Mode button For selecting the operating mode:
cooling
dehumidification
ventilation
17 Timer LED Illuminated when the timer is
activated.
18 Timer button For switching the timer function
on and off: in increments of
0.5hours (0.5h to 10h) or in
increments of 1hour (11h to
24h)
19 On/Off button Power button: For switching the
device on and off
No. Designation Function
20 Sleep button For switching night mode on and
off
21 Sleep LED Illuminated when night mode is
activated.
22 Fan button For setting the fan stage:
Low = lowest level
Med = medium level
High = highest level
Auto = automatic speed
regulation
23 Fan stage LED Indicates the current fan stage.
Info
An acoustic signal is emitted each time a setting is
activated.
Switching the device on
1. Allow the device to rest for a time.
2. Once you have completely installed the device as
described in the Start-up chapter, you can switch it on.
3. Press the On/Off button(19).
ð The device switches on.
4. Select the desired operating mode.
The device switches off automatically when the condensation
tank is full. H8 is displayed on the segment display(13).
Setting the operating mode
The device has the following operating modes:
cooling
dehumidification
ventilation
Cooling
In cooling mode the room will be cooled down to a certain
preselected temperature.
Upon reaching the target temperature, the device switches to
standby, i.e. the fan keeps running at the preselected level, but
the device does not resume cooling until the preselected value
is exceeded again.
1. Use the Mode button(16) to select cooling mode.
ð The operating mode LED Cool(15) is illuminated.
2. Select the desired target temperature by use of the arrow
buttons(12 or 14). The temperature can be adjusted in
increments of 1°C in a range between 16°C and 30°C.
ð The desired target temperature is indicated on the
segment display(13).
3. Select the desired fan stage by use of the Fan button(22).
ð The fan stage LED(23) indicates the desired fan stage.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trotec PAC2010E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trotec PAC2010E

Trotec PAC2010E Bedienungsanleitung - Deutsch - 23 seiten

Trotec PAC2010E Bedienungsanleitung - Holländisch - 23 seiten

Trotec PAC2010E Bedienungsanleitung - Französisch - 23 seiten

Trotec PAC2010E Bedienungsanleitung - Spanisch - 23 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info