Bedienungsanleitung Trotec PAC2010E (Seite 14 von 23) (Englisch)

688812

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

14 EN

local air conditioner PAC 2010 E / PAC 2610 E

Night mode

The night mode can be activated when in cooling mode. Night

mode comes with the following settings:

• After one hour the preset temperature is increased by 1°C.

After 2hours the preset temperature will again be

increased by 1°C. Then the temperature is kept constant.

Proceed as follows to activate night mode:

1. Select cooling mode.

2. Press the Sleep button(20).

ð The sleep LED(21) is illuminated.

3. In order to switch the night mode off, press the Sleep

button(20) once again.

ð The sleepLED(21) goes out.

Remote control

All settings of the device can also be made using the remote

control included in the scope of delivery.

Insert suitable batteries in the remote control (seechapter

Technical annex).

Info

After a longer period of non-use, the remote control

will switch to standby mode. Standby mode can be

terminated by pressing the ON/OFF button(33) on the

remote control. The device automatically uses the

current settings entered via the remote control.

°F

OPER

AUTO

°C

T-O N T- OFF

CO OL

DRY

FAN

X-FAN

SL EE P

LO CK

SP EE D

No. Designation Meaning

24 Remote control

transmitter/

receiver

Communication between device and

remote control using infrared

25 Display Indication of the target temperature

during setting

Indication of the number of hours during

timer programming

Indication of the operating mode

Indication of the fan stage

Indication of the self-cleaning function

(X-FAN)

Timer on/ off indication

°C / °F indication

Key lock indication

Night mode indication

26 MODEbutton Selection button for the mode of

operation

27 Plus button For setting the target temperature for

cooling

For setting the number of hours for the

timer function

28 X-FAN button Self-cleaning function/ internal drying

during stand-by

29 TIMER button For switching the timer function on and

off: in increments of 0.5hours

(0.5h to 10h) or in increments

of 1hour (11h to 24h)

30 SLEEP button For switching night mode on and off

31 FAN button For setting the fan stage

32 Minus button For setting the target temperature for

cooling

For setting the number of hours for the

timer function

33 ON/OFF button Power button: For switching the device

on and off

Info

An acoustic signal is emitted each time a setting is

activated.

Changing the unit °C / °F

The temperature can be indicated in either °C or °F on the

remote control's display(25) and on the segment display(13) of

the device.

The temperature unit can only be changed in standby mode.

Please proceed as follows to change the temperature unit:

1. Press the minus(32) and MODE(26) buttons

simultaneously.

ð The displayed temperature is converted to the other unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC2010E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC2010E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info