Bedienungsanleitung Trotec PAC2600X (Seite 13 von 21) (Englisch)

688784

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 13

local air conditioner PAC 2100 X / PAC 2600 X

Setting the timer

The timer has two modes of operation:

• automatic switch-on upon expiry of a preset number of

hours

• automatic switch-off upon expiry of a preset number of

hours

The timer can be programmed in increments of 0.5hours

(0 to 10h) or in increments of 1hour (10 to 24h).

This setting can only be made using the remote control.

The function can be set in all operating modes. It can be

activated both during operation and in standby mode.

Automatic switch-on and automatic switch-off may be enabled

at the same time. If so, Timer On and Timer Off will both be

displayed simultaneously.

Note

Do not leave the operating device unattended in a

freely accessible room with an activated timer.

Automatic switch-on

ü The device is switched off.

1. Press the TIMER ON button(21) to activate the timer.

2. Hold or repeatedly press the TIMER ON button(21) to

select the desired number of hours until automatic

switch-on.

3. Wait for 3seconds to confirm the setting.

ð The number of hours until automatic switch-on will be

indicated for approx. 3s both on the display(19) and

the segment display(15).

ð The Timer On setting will also be indicated on the

display(19).

ð A dot will be indicated in the bottom right corner of the

segment display(15).

ð After the predefined time, the device switches itself on.

Notes regarding automatic switch-on:

• If the device is disconnected from the power supply, all

settings for automatic switch-on are deleted.

• Manually switching the device on disables the automatic

switch-on function.

• If you select 0hours, the timer will be off.

Automatic switch-off

ü The device is switched on.

1. Press the TIMER OFF button(22) to activate the timer.

2. Hold or repeatedly press the TIMER OFF button(22) to

select the desired number of hours until automatic

switch-off.

3. Wait for 3seconds to confirm the setting.

ð The number of hours until automatic switch-on will be

indicated for approx. 3s both on the display(19) and

the segment display(15).

ð The Timer Off setting will also be indicated on the

display(19).

ð A dot will be indicated in the bottom right corner of the

segment display(15).

ð After the predefined time, the device switches itself off.

Automatic operation

During automatic operation cooling and ventilation are regulated

depending on the ambient and target temperature.

This setting can only be made using the remote control.

1. Use the MODE button(27) to select Auto mode.

ð Auto mode is displayed in the operating mode

indication(35).

Night mode

Night mode can be activated in cooling mode and during

automatic operation.

This setting can only be made using the remote control.

Night mode comes with the following settings:

• After 30minutes the preset temperature is increased by

1°C. After 1hour the preset temperature will again be

increased by 1°C. Then the temperature is kept constant

for 7hours.

Subsequently, the device switches back to the preset

temperature from before night mode.

• Ventilation is preset to the automatic stage and cannot be

adjusted.

To activate night mode, please proceed as follows:

1. Select cooling mode or automatic operation.

2. Press the SLEEP button(24).

ð Both the night mode and the automatic stage will be

indicated on the display(19).

3. In order to switch the night mode off, press the

SLEEP button(24) once again.

ð The night mode indication(32) disappears.

ð The automatic stage remains unaffected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC2600X Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC2600X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info