Bedienungsanleitung Trotec PAC3900X (Seite 11 von 21) (Englisch)

689435

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 11

local air conditioner PAC 3900 X

2. Press the Speed button(23) to set the desired fan stage.

ð The fan speed LED(18) indicates the selected fan stage.

When the automatic stage is activated, none of the fan

speed LEDs(18) is illuminated.

ð The Fan LED(14) will be illuminated to indicate

ventilation mode.

Automatic operation

In automatic operation mode the cooling or ventilation process

will be regulated depending on the ambient temperature and the

target temperature.

1. Press the Mode button(26) until the Auto LED(14) is

illuminated.

ð If the difference between the ambient and target

temperature is ≥2°C, the device automatically

switches over to cooling operation. The LEDs Auto(14),

Cool(14), On/ Off(20) and possibly Degrees

Celsius(16) are illuminated. When combining automatic

and cooling operation, the fan speed is regulated

automatically.

ð If the difference between the ambient and target

temperature is <2°C, the device automatically

switches over to fan operation. The LEDs Auto(14),

Fan(14) and possibly Degrees Celsius(16) are

illuminated. When combining automatic and fan

operation, the fan speed is regulated automatically.

Setting the timer

The timer has two modes of operation:

• automatic switch-on upon expiry of a preset number of

hours.

• automatic switch-off upon expiry of a preset number of

hours.

This setting can be made at the device or using the remote

control.

Automatic switch-on and automatic switch-off may be enabled

at the same time. The Timer LEDs(13) on the control panel will

then be illuminated simultaneously. When using the remote

control for setting, Timer On and Timer Off(35) will additionally

be shown on the display(30) simultaneously.

The function can be set in all operating modes and also during

stand-by.

The number of hours can be set in increments of 0.5hours

(0.5h to 10h) or in increments of 1hour (10h to 24h).

Note

Do not leave the operating device unattended in a

freely accessible room with an activated timer.

Automatic switch-on

ü The device is switched off.

1. Press the Timer button(27) until the Timer On LED(13) is

illuminated.

2. Set the desired number of hours by use of the Increase

value(24) and Decrease value(25) buttons.

ð The number of hours will be indicated on the segment

display(15) for approx. 5s.

ð The timer setting equals the desired number of hours.

ð After the predefined time, the device switches itself on.

Notes regarding automatic switch-on:

• If the device is disconnected from the power supply, all

settings for automatic switch-on are deleted.

• Manually switching the device on disables the automatic

switch-on function.

• If you select 0hours, the timer will be off.

Automatic switch-off

ü The device is switched on.

1. Press the Timer button(27) until the Timer Off LED(13) is

illuminated.

2. Set the desired number of hours by use of the Increase

value(24) and Decrease value(25) buttons.

ð The number of hours will be indicated on the segment

display(15) for approx. 5s.

ð The timer setting equals the desired number of hours.

ð After the predefined time, the device switches itself off.

Notes regarding automatic switch-off:

• Pressing the On/ Off button(21) deactivates the automatic

switch-off function.

Night mode

Night mode can be activated in cooling mode and during

automatic operation.

Night mode comes with the following settings:

• After 1 hour the preset temperature is increased by 1°C.

After another 30minutes the preset temperature will again

be increased by 1°C. Then the temperature is kept

constant for 7hours before the device sets the original

temperature automatically.

• In automatic mode, the fan speed is preset to the lowest

stage and cannot be adjusted. In cooling mode, the fan

speed can be changed, which disables night mode.

To activate night mode, please proceed as follows:

1. Select cooling mode or automatic operation.

2. Press the Sleep button(22).

ð The Operating mode(14) and Sleep LEDs(19) light up.

3. In order to switch the night mode off, press the Sleep

button(22) once again.

ð The Sleep LED(19) turns off.

ð The selected operating mode remains active.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC3900X Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC3900X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info