Bedienungsanleitung Trotec PAC3900X (Seite 13 von 21) (Englisch)

689435

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 13

local air conditioner PAC 3900 X

No. Designation Meaning

41 Standby

indication

Displayed when the remote control is in

standby mode.

Switching the LEDs on the control panel on or off

The control panel illumination at the devices can be switched on

and off.

This setting can only be made using the remote control.

1. Press the LED button(34).

ð The LEDs and the segment display(15) on the control

panel will be switched off.

ð The device continues to run with the selected settings.

2. Press the LED button(34) again.

ð The LEDs and the segment display(15) on the control

panel will be switched back on.

Saving preferred settings

You can save your preferred settings and return to the previous

setting.

This setting can only be made using the remote control.

1. Press the SHORT CUT button(31) for 2s.

ð The display(30) goes blank for 1s.

ð The current settings including operating mode, target

temperature, fan stage and night mode (if activated) will

be saved.

2. Press the SHORT CUT button(31) for 1s.

ð The display(30) goes blank for 1s.

ð The device returns to the previous setting including

operating mode, target temperature, fan stage and night

mode (if activated).

3. In order to delete the settings, press the SHORT CUT

button(31) again for 2s.

ð The display(30) goes blank for 1s.

ð The settings are now deleted.

Memory function

After a power failure during operation the device will

automatically be switched back on. The chosen operating mode

settings will be saved, a possibly programmed timer will not.

All the chosen settings (incl. timer) remain saved on the remote

control. As soon as the device receives an input from the remote

control, the settings will be transmitted from the remote control

to the device.

The compressor may start up with a delay of 3min, as it is

provided with an internal protection against direct restart.

Energy saving

Upon reaching the preselected target temperature compressor

and fan will be switched off automatically in order to reduce the

power consumption. The Energy saving mode LED(17) is

illuminated.

Once the preselected target temperature is exceeded,

compressor and fan switch back on.

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Empty the condensation tray if necessary.

• If necessary, remove the condensation drain hose and any

residual fluid from it.

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Errors and faults

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

The device does not start:

• Check the power connection.

• Check the power cable and mains plug for damages.

• Check the on-site fusing.

• Observe the operating temperature according to the

Technical data chapter.

• Wait for 10minutes before restarting the device.

If the device is not starting, have the electrics checked by

a specialist company or by Trotec.

The device works with reduced or no cooling capacity:

• Check whether cooling mode is selected.

• Check the proper fit of the exhaust air hose. In case of

kinks, bends or blockage in the hose, exhaust air cannot

be discharged. Clear the way for the exhaust air.

• Check the position of the ventilation flaps. They should be

opened to the maximum.

• Check the air filter(s) for dirt. If necessary, clean or replace

the air filter(s).

• Check the minimum distance to walls or other objects.

Position the device a little more in the room's centre

if required.

• Check whether any windows and/or doors of the room are

open. If so, close them. One window has to remain open

for the exhaust air hose nonetheless.

• Check the temperature setting at the device. Reduce the

set temperature if it is higher than the room temperature.

The device is loud or vibrates:

• Check whether the device is set up in a stable and upright

position.

Condensate is leaking:

• Check the device for leaks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC3900X Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC3900X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info