Bedienungsanleitung Trotec PAGS20-115 (Seite 20 von 23) (Englisch)

753913

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

19 EN

cordless angle grinder PAGS 20-115

The guard is loose:

• Make sure that the coded projections are firmly locked in

place in the designated groove.

• Make sure that the locking lever is folded in completely.

• If necessary, tighten the adjusting screw.

The cutting disc does not move although the motor is

running:

• Make sure that the clamping nut is firmly tightened, see

chapter Tool change.

• Make sure that there is no workpiece debris blocking the

drive. Remove the blockages, if any.

• Make sure that the cutting disc is not jammed in the

workpiece.

The motor slows down:

• Check whether the device is overloaded by the workpiece.

• Reduce the pressure applied on the workpiece.

• Check whether the workpiece is suitable for the tasks to

be carried out.

The cutting disc experiences difficulties penetrating the

material to be processed or the cutting performance is

insufficient:

• Check whether the chosen cutting disc is suitable for the

material to be processed.

• If the cutting disc is worn, replace it with a new one.

The device becomes hot:

• Check whether the cutting disc is suitable for the tasks to

be carried out.

• Make sure not to exert too much pressure on the device

during operation.

• Keep the venting slots clear to prevent the motor from

overheating.

• Wait for 10minutes before switching the device back on.

Note

Wait for at least 3 minutes after maintenance and

repair work. Only then switch the device back on.

Your device still does not operate correctly after these

checks?

Please contact the customer service. If necessary, bring the

device to an authorized specialist electrical company or to

Trotec for repair.

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug or the battery with wet or

damp hands.

• Switch off the device.

• Allow the device to cool down completely.

• Remove the battery from the device.

Warning of electrical voltage

Maintenance tasks which require the housing to be

opened must only be carried out by authorised

specialist companies or by Trotec.

Notes on maintenance

Inside the device, there are no parts that need to be maintained

or lubricated by the user.

Cleaning

The device should be cleaned before and after each use.

Note

The device does not have to be lubricated after

cleaning.

Warning of electrical voltage

There is a risk of a short-circuit due to liquids

penetrating the housing!

Do not immerse the device and the accessories in

water. Make sure that no water or other liquids can

enter the housing.

• Clean the device with a soft, damp and lint-free cloth.

Ensure that no moisture enters the housing. Protect

electrical components from moisture. Do not use any

aggressive cleaning agents such as cleaning sprays,

solvents, alcohol-based or abrasive cleaners to dampen

the cloth.

• Dry the device with a soft, lint-free cloth.

• Remove dust from inside the guard, from the mounting

flange and from the clamping nut.

• Keep the connecting terminals on the device and charger

clean.

• Keep the connecting terminals on the battery pack clean.

• Keep the ventilation openings free from dust deposits to

prevent overheating of the motor.

• For maintenance of the cutting disc, see chapter Tool

change.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAGS20-115 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAGS20-115

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info