Bedienungsanleitung Trotec PMTS10-20V (Seite 5 von 21) (Englisch)

753363

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 5

cordless multi-function tool PMTS 10-20V

Warning

Fire hazard! Avoid overheating of the material to be

sanded and the sander. Before taking work breaks

always empty the dust container.

Unfavourable conditions such as flying sparks when

sanding metal render abrasive dust in the dust bag,

micro filter, paper bag (or in the filter bag or filter of the

vacuum cleaner) prone to self-ignition. The risk is

particularly high when the abrasive dust is mixed with

residues of paint, polyurethane or other chemical

substances and the sanding material is hot after a

longer period of work.

•Keep your hands out of the sawing area. Do not reach

underneath the workpiece. Risk of injury upon contact

with the saw blade.

•Use appropriate detection equipment to track down

concealed supply lines or consult the local utility

companies. Contact with electrical lines may result in fire

and electric shock. Damaging a gas line may lead to an

explosion. Penetrating a water line causes property

damage and may cause an electric shock.

•During operation hold onto the power tool with both

hands and make sure you stand firmly on the ground.

It is safer to handle the power tool with two hands.

•Use the anti-vibration handle supplied with the device.

Losing control of the power tool may result in personal

injury.

•Secure the workpiece. The grip of tensioning devices or a

vice is more secure than holding the workpiece only by

hand.

Wear protective gloves when changing the insertion

tools. The applied tools heat up during longer

operation.

•Do not scrape moistened material (e.g. wallpaper) and

not on moist subsurfaces either. Water entering a power

tool will increase the risk of electric shock.

•Do not treat the surface to be processed with liquids

containing solvents. Toxic fumes may be produced

during scraping owing to the heat-up of the materials.

•Exercise particular caution when using scraper and

cutter. These tools are especially sharp involving a risk of

injury.

•Ensure sufficient ventilation when processing plastics,

paints, varnishes etc.

•Wait until the device has come to a standstill, before

putting it down.

Intended use

Only use the device PMTS 10-20V:

• For sawing and cutting

– Wood

– Plastic

– Plaster

– Non-ferrous metals

– Fixing elements

(e.g. screws, nails, clamps etc.)

• For processing soft wall tiles

• For sanding and scraping of small, dry areas

whilst adhering to the technical data.

We recommend using the power tool with original Trotec

accessories.

Foreseeable misuse

Do not use the device PMTS 10-20V for:

• cutting up tiles

• sawing large screws or stainless steel

• processing workpieces requiring a continuous water

supply

Only use the device in weatherproof surroundings.

Any other use than the one described in the chapter "Intended

use" is regarded as reasonably foreseeable misuse.

Personnel qualifications

People who use this device must:

• be aware of the dangers that occur when working with

electric devices in damp areas.

• have read and understood the instructions, especially the

Safety chapter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PMTS10-20V Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PMTS10-20V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info