Bedienungsanleitung Trotec PMTS10-20V (Seite 7 von 21) (Englisch)

753363

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 7

cordless multi-function tool PMTS 10-20V

Warning

Make sure not to hit power, gas or water lines when

working with a power tool.

If necessary, use a pipe detector to check the wall you

want to drill in or slit open.

Warning

Risk of injuries caused by flying parts or bursting tool

heads.

Warning

Dangers can occur at the device when it is used by

untrained people in an unprofessional or improper way!

Observe the personnel qualifications!

Warning

The device is not a toy and does not belong in the

hands of children.

Warning

Risk of suffocation!

Do not leave the packaging lying around. Children may

use it as a dangerous toy.

Caution

Vibration emissions can cause a health hazard if the

device is used for an extended period of time or if it is

not properly handled and maintained.

Caution

Keep a sufficient distance from heat sources.

Note

If you store or transport the device improperly, the

device may be damaged.

Note the information regarding transport and storage of

the device.

Behaviour in the event of an emergency/ emergency

stop function

Emergency stop:

Removing the battery results in the function of the device

stopping immediately. Leave the battery out in order to secure

the device against accidental switch-on.

Behaviour in the event of an emergency:

1. Switch the device off.

2. In the event of an emergency, remove the battery from the

device: Hold the release button of the battery and pull the

battery off the device as described in chapter "Removing

the battery".

3. Do not insert the battery if the device is defective.

Information about the device

Device description

Using the wireless multi-function tool PMTS 10-20V, no

additional power connection is required at your workplace.

Up to 19,000 times per minute the insertion tool moves to and

fro by 3.2° owing to the oscillating drive. This guarantees

precise working in a very confined space.

The integrated oscillation rate selection permits an optimally

adjusted exertion of force for each application.

Using the quick-release system you can exchange accessories

without tools in a matter of seconds.

The anti-vibration handle ensures optimum guidance and

vibration-damped working.

It is suited particularly well for working close to or lined up with

the edge.

To avoid an excessive formation of dust and dirt during grinding

work, simply connect the convenient dust extraction system

(included in the scope of delivery) to a vacuum cleaner.

The integrated LED work light offers an improved illumination of

the workpiece or working surface.

The battery comes with its own battery level indication. As a

result you can check the current charging status without having

to connect it to the device.

For yet more application possibilities you can of course combine

your multi-function tool with further accessories, e.g. the

original Trotec accessory set for bathroom restoration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PMTS10-20V Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PMTS10-20V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info