Bedienungsanleitung Trotec PTNS10-20V (Seite 8 von 17) (Englisch)

753360

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

8 EN

cordless tacker PTNS 10-20V

Technical data

Parameter Value

Model PTNS10-20V

Nominal voltage 20V

Impact frequency 30spm

Fastener type: staple

Type

Length

Width

Thickness

15 – 25 mm

6 mm

1.2 mm

Fastener type: wire nail

Type

Length

Width

15, 20, 25, 32mm

0.8 mm

Max. holding capacity of magazine 100 staples, 50 wire nails

Weight 2.5 kg

Battery Multiflex 20–2.0DC

Type Li-ion

Nominal voltage 20 V

Capacity 2Ah

Quick charger Multiflex 20–2.0AC

Input

Nominal voltage 230 – 240V/ 50Hz

Power input 65W

Output

Nominal voltage 21.5V

Charging current 2.4A

Fusing 3.15A (slow-blowing)

Charging time 1 h

Protection class II/

Vibration information according

to EN60745

Vibration emission value ah3.65 m/s²

Uncertainty K 1.5 m/s²

Sound values according to

EN60745

Sound pressure level LpA 84.1dB(A)

Sound power LWA 95.1dB(A)

Uncertainty K 3dB(A)

Wear hearing protection.

Excessive noise can lead to hearing loss.

Information on noise and vibration:

• The vibration level specified in these instructions was

determined by means of a measuring method standardized

in EN60745 and can be used for a device comparison. The

specified vibration emission value may also be used for a

preliminary assessment of the exposure.

Caution

Vibration emissions can cause a health hazard if the

device is used for an extended period of time or if it is

not properly handled and maintained.

• The vibration level will change depending on the

application of the power tool and may in some cases differ

from the value specified in these instructions. The vibration

load may be underestimated if the power tool is used

regularly in such a way. For a precise estimation of the

vibration load during a certain work period, it is also

important to consider the periods during which the device

is switched off, or is running but not actually employed.

This can reduce the vibration load over the entire work

period significantly.

Transport and storage

Note

If you store or transport the device improperly, the

device may be damaged.

Note the information regarding transport and storage of

the device.

Transport

For transporting the device, use the transport case included in

the scope of delivery in order to protect the device from external

influences.

Before transporting the device, observe the following:

• Switch off the device.

• Hold onto the mains plug while pulling the power cable of

the charger out of the mains socket.

• Allow the device to cool down.

• Remove the battery from the device.

The supplied Li-ion batteries are subjects to the requirements of

dangerous goods legislation.

Observe the following when transporting or shipping Li-ion

batteries:

• The user may transport the batteries by road without any

additional requirements.

• If transport is carried out by third parties (e.g. air transport

or forwarding company), special requirements as to

packaging and labelling must be observed. This includes

consulting a dangerous goods specialist when preparing

the package.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PTNS10-20V Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PTNS10-20V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info