Bedienungsanleitung Truma Mover H TE (Seite 21 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch)

484674

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Conformity Declaration

1. Manufacturer master data

Name: Truma Gerätetechnik GmbH & Co. KG

Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn

2. Equipment identification

Model / Version :

Mover H SE / H TE manoeuvring aid

3. Complies with the requirements of the following

EC directives

3.1 R&TTE directive (1999/5/EC)

3.2 Low voltage directive (73/23/EEC)

3.3 EMC directive (89/336/EEC, 2004/108/EC)

3.4 Interference suppression in motor vehicles

(72/245/EEC, 2006/28/EC)

3.5 Machinery Directive 2006/42/EC

and bears the type approval number e1 03 4473 and the CE

symbol.

Mover H SE / Mover H TE:

Class 1, frequency 868 MHz.

Countries:

AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,

IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.

4. Basis of proof of conformity

EN300220-2:2006, EN300220-1:2006 (R&TTE art. 3.2),

EN301489-1:2005, EN301489-3:2002 (EMC art. 3.1b),

EN61000-4-2:2001, EN61000-4-3:2006, EN61000-4-6:2001,

EN55022:2003 (Class B), ISO 7637-2:2004,

EN60950:2001, 2006/28/EC, 2006/42/EC

5. Monitoring body

Federal Office for Motor Traffic

6. Information concerning position of undersigned

Signature: Dr. Schmoll

Executive Manager, Technology Putzbrunn, 29.07.2008

Commissioning the Mover

Ensure the battery used to operate the Mover is fully charged.

Park the caravan outside on an open, level surface and apply

the handbrake. Ensure that the rollers are disengaged from

the road tyres and the corner steadies are raised.

Connect battery terminals to battery, check that all cables are

secure and not hot or indicating signs of short circuits, etc.

Plug the 13-pin plug into the safety socket.

If there is a fault in both caravan brake lights, the power

circuit of the safety socket is not closed. In this case the

Mover cannot be operated.

Move slide switch on remote hand set to the “On” I position.

This switches the remote hand set on – green LED flashes for

5 seconds in combination with the acoustic alarm until the

control unit is ready for operation. If LED does not illuminate,

check polarity and condition of batteries in remote hand set.

The remote hand set switches itself off after about 2 minutes

if no buttons are pressed.

Check whether both drive motors are stationary. Press the

“forwards” button with the remote hand set switched on –

both drive motors must now move in the forward direction.

Swivel the drive rollers against the tyres using the remote hand set.

Please ensure that there are no obstructions beneath the cara-

van, then release the handbrake. Now check all functionality

as per the operating instructions.

Apply caravan brake. Swivel out the drive rollers and move

slide switch on remote hand set to the “Off” £ position to

switch the remote hand set and the Mover off. Re-check

distance between drive rollers and tyres.

The clearance between the swivelled drive rollers and

tyres must be between 10 – 26 mm.

Warning information

The yellow sticker with the warning information, which is

enclosed with the appliance, must be affixed by the installer

or vehicle owner to a place in the vehicle where it is clearly

visible to all users (e.g. on the wardrobe door)! Ask Truma to

send you a sticker, if necessary.

Technical data

Operational voltage

12 V DC

Current consumption

average approx. 20 A maximum 120 A

Stand by consumption

< 15 mA

Remote hand set frequency

Class 1, 868 MHz

Speed

approx. 16 cm per second (depending on weight and incline)

Weight

Mover H SE / H TE approx. 26 kg

Angle brackets (1 pair), depending on the model 5 – 6 kg

Fuse swivel-in motors

Blade fuse 20 A

Area of operation Mover SE

Single axle caravans with a total weight up to 1800 kg

Area of operation Mover H TE

Dual axle caravans with a total weight up to 2250 kg

Right to effect technical modifications reserved!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Truma Mover H TE Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info