Bedienungsanleitung Tunturi Pure Treadmill 3.1 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Französisch)

615442

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OWNER’S MANUAL

•

PURE RUN 3.1

ENTER WEIGHT:

After pressing the POWER key, WT will

appear in the dot matrix and the previous

user weight will appear in the Calories

window. Enter the weight of the user by

using the speed or incline arrow keys.

Press ENTER to confirm the weight.

MANUAL MODE:

If you select to operate the treadmill

in manual mode, press START. The

treadmill will start at 0.8 kph after a 3,2,1

countdown. You may then adjust the

speed and incline using the quick keys

or the up/down arrow keys.

PROGRAM MODE:

After pressing POWER, choose the

desired program by keep pressing

SELECT key or after press SELECT then

using the speed + - or incline + - keys to

choose one of the 6 preset programs.

Note the program layout appears in

the dot matrix display. Press ENTER

to verify the selection. Press START to

begin the program. All programs have

ten one-minute segments. The program

repeats the ten-minute segments until

the user presses STOP.

P-1 ROLLING HILLS:

This is an elevation program that goes

from 0% to 3% grade.and the treadmill

will start at 0.8 kph. Each minute, the

elevation changes.

The speed is controlled by the user

P-2 MOUNTAIN PASS:

This is an elevation program that goes

from 0% to 6% grade.

The speed is controlled by the user.

P-3 MOUNTAIN PEAK:

This is a challenging elevation program

that goes from 0% to 8% grade.

The speed is controlled by the user.

P-4 CALORIE BURN:

This is an interval elevation program

where the elevation alternates between

0% and 4%.

The user controls the speed.

5. Press ENTER button again and the

window will show total distance.

6. Press ENTER button again and the

window will show total hours.

7. Press ENTER button to go back to

ON position.

ODOMETER:

An odometer showing accumulated

distance will appear in the time window

for one second when the safety key is

placed on the monitor.

TIME-OUT:

If the treadmill is turned on, and the belt

is not moving, the monitor will hibernate

after five minutes and shutdown after

seven minutes.

RE-START :

If the Treadmill is stopped during use,

when the START button is pressed

again, the treadmill will ramp-up the

speed to where it was stopped. If the

treadmill is stopped for 5 minutes or

more, Power is lost and the treadmill will

have to be re-started by pressing the

power button.

PROGRAMS

OPERATION INSTRUCTION

(Please read carefully before using the

treadmill):

SAFETY TIPS:

To Start attach the safety key to the

monitor. The treadmill will not operate

without the safety key. Please clip the

other end of the safety key to your

clothing before exercising to ensure

the machines will stop in case the user

accidentally walks off the treadmill. If

the user falls off the treadmill, the safety

key will come off the monitor and the

treadmill will stop at once to avoid further

injury.

PRESS POWER:

This turns the electronic power on. The

treadmill will not start unless POWER is

pressed first.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tunturi Pure Treadmill 3.1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info