Setting the fuel quality
If enabled in your combustion system, Fumis Premium allows you to select up to 3 different qualities for
pellets If you change pellet quality and the ash is getting darker, you can change “Fuel” level to level 1.
Standard setting is level 2..
To select the fuel quality, follow the next steps:
- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently is not in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Tap on ''Fuel'' to enter the Fuel menu
- Set the desired fuel quality (for pellets and/or wood logs) by tapping on and/or icons. The
changes are saved immediately.
Display brightness
Fumis Premium offers different possibilities for setting the display brightness. Thanks to an integrated
ambient light sensor, optionally Fumis premium is able also to adapt the display brightness automatically,
according to the brightness of the ambient which surrounds it.
Under display settings you are able to:
- Activate the automatic adaptation to the ambient brightness
- Setup the brightness of the display when active
- Setup the brightness of the display when switched to idle mode (after 30 seconds of inactivity)
Setting the automatic brightness adaptation
- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently is not in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Navigate to the ''Display brightness'' by tapping on and/or
- Tap on ''Display brightness'' to enter into the Display brightness menu
