Enabling the Eco Mode function
When the temperature rises over the set point, the heating device automatically turns OFF and the screen
below appears. It will automatically restart when the temperature falls below the set point.
Note:
If the Eco Mode function isn’t included in your heating device, skip this chapter.
To enable/disable the Eco Mode function, follow the steps below:
- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently is not in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Navigate to the ''Temp. offsets'' by tapping on and/or
- Tap on ''Temp. offsets'' to enter into the Temp. offsets menu
- Activate/deactivate the Eco Mode function by tapping the ''ON/OFF'' icon
After activating the Eco Mode, the heating device will automatically turn ON/OFF according to the
temperature set point.
Note:
For detailed description of the Eco Mode function, refer to the user guide of your heating device.
Idle display mode settings
Fumis Premium automatically switches to idle mode after 30 seconds of inactivity and exits from it when
touched again. Depending on the settings for the idle mode, the screen in idle mode displays:
- the clock only
- the WATER temperature only
- Switching between the clock and WATER temperature.
- The state of the heating device (when the heating device is in OFF state)
- The fuel autonomy (if enabled in the Fumis Premium and supported by the heating devices software)
- Errors/alerts (if present)
Note:
It never switches to idle mode from the service menu.
