484943
33
Zoom out
Zoom in
Vorherige Seite
1/140
Nächste Seite
33
Program
number
Program name Program description
8 TEIG
DOUGH
For preparing dough, without
baking
9 ULTRA-
SCHNELL
ULTRA-FAST
This program is suitable for
light breads made of superfine
flour (wheat or a mixture of
wheat and spelt). This program
is not suitable for whole grain
bread or rye bread, nor should
it be used for sourdough bread.
10 BACKEN
BAKE
For baking of yeast or batter
dough that has been prepared
separately (either by hand or
in the DOUGH program). This
program is not suitable for pie
dough or choux pastry dough.
11 SÜSSSPEISEN
DESSERT
For baking sweet baked goods.
BRÄUNGUNGSGRAD/BROWNING
With this button you can set the degree of browning to HELL/
LIGHT MITTEL/MEDIUM DUNKEL/DARK. This function is not
available in the following programs: JAM, DOUGH and the user
program. The selected setting is shown on the display.
BROTGRÖSSE/LOAF SIZE
This button is used to select the size of the loaf in various
programs:
STUFE/LOAF SIZE I = for smaller loaves (approx. 500-850 g)
STUFE/LOAF SIZE II = for larger loaves (approx. 850-1,200 g)
Please note that it is not possible to select the loaf size in the
following programs: BAKING POWDER, JAM, DOUGH, BAKE and
DESSERT. You will find our recommendations in the recipes. The
selected setting is shown on the display.
You can also bake smaller loaves by reducing the quantities by
one-half, e.g. for singles and small households. In this case, we
recommend that you always use the BASIC program on LOAF
SIZE I. Please be aware, however, that the loaf will be relatively
flat in this case.
PAUSE
The PAUSE button can be used to briefly interrupt the program,
for example to remove the kneader from the dough or to brush
the surface of the bread with water or milk, etc. Press the PAUSE
button for about 1 second to interrupt the current program.
When the display blinks, you know that the program has been
interrupted. Now you can remove the kneader or brush the surface
of the bread. Then close the lid. To resume the program, press
the PAUSE button again for about 1 second. The display stops
blinking and the program continues.
CAUTION: Do not interrupt the program for more than about
5 minutes. Longer interruptions can affect the rising of the dough
and ruin the bread.
As long as the pause function is active (i.e. the display is blinking),
the START/STOP button is locked and the program cannot be
completely discontinued.
LICHT/LIGHT
The Backmeister
®
Skala is equipped with lights for the baking
compartment, so you can observe the progress of the dough or of
the bread at any time without having to open the lid. The baking
compartment is not lighted throughout the entire program. To
check the dough, press the LICHT button to turn on the light
in the baking compartment. After one minute, or as soon as you
press the button again, the light goes out.
BUTTON LOCK
To prevent accidental pressing of the buttons, e.g. by children,
you can lock the buttons. If you first press the ABSCHNITT button
and then the BROWNING button, you will hear three beeps,
indicating that the buttons (with the exception of ABSCHNITT
and BRÄUNUNGSGRAD) are deactivated. To turn off the button
lock function, press the ABSCHNITT button again and then the
BRÄUNGSGRAD button and wait for the three beeps. Please note:
when the button lock function is on, the scale cannot be used.
EIGENPROGRAMM/USER PROGRAM
In addition to the other numerous programs provided by the
BACKMEISTER
®
you can also program your own USER PROGRAM.
You can change the basic time and program phase settings as
programmed at the factory or leave out various program phases.
This allows you to develop your own individual program for baking
bread or preparing dough. Below you will find a sample recipe.
First you should become familiar with the following information
on the basic programming and use of the USER PROGRAM.
USER PROGRAM
The program features the following options
Browning not programmable
Timer programmable
Loaf size I and II not programmable
The default program is the same as for the BASIC program.
Phase Preset Programmable time frame
Total time 3:00 hours
Knead 1 10 minutes 6-14 minutes
Rise 1 20 minutes 20-60 minutes
Knead 2 15 minutes 5-20 minutes
Rise 2 25 minutes 5-120 minutes
Rise 3 45 minutes 0-120 minutes
Bake 65 minutes 0-80 minutes
Keep warm 60 minutes 0-60 minutes
The times can be programmed as shown in the table.
Proceed as follows:
Select the USER PROGRAM with the Menu button.
Select the desired phase with the ABSCHNITT button. Knead
1 and the programmed time 0:10 for this phase appear on the
display.
The time can be changed by means of the ZEITWAHL button.
Press it repeatedly until the desired time appears on the display
(past OFF, if necessary).
Confirm the change with the ABSCHNITT button. Press this
button again and the next program phase and the programmed
time will appear on the display: Rise 1 = and 0:20.
If the maximum programmable time for the respective program
phase is exceeded by pressing the ZEITWAHL button, O will
appear on the display if this is possible according to the above
table. This phase is then skipped during the program.
Every programmed setting must be confirmed by pressing the
ABSCHNITT button, so you can continue programming the next
program phase.
Once you have programmed all phases to suit your preferences,
conclude the programming by pressing the ABSCHNITT button
and then the START/STOP button. The programmed time for the
user program appears on the display. The program then starts
either immediately or after the time set via the timer function.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Unold 68615 Backmeiser wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info