Bedienungsanleitung UWATEC Galileo Sol (Seite 63 von 80) (Englisch)

550277

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

3. Diving with Galileo

English

3.7 Diving with more than

one gas mixture



NOTE:

You must set PMG to ON for Galileo

to allow diving with more than one gas

mixture. See section 2.3.9 for details

about setting the PMG function.

Galileo is equipped with the ZH-L8 ADT MB

PMG algorithm. PMG stands for Predictive

Multi Gas, meaning that when you program

more than one gas mixture, Galileo will

predict the switch to the higher oxygen

concentration gas(es) at the depth(s)

that you speciﬁ ed and provide you at all

times with a decompression schedule

comprehensive of all gas mixtures that you

programmed. In other words, you get full

credit at any point during the dive for all the

extra gas that you are carrying with you.

At the same time Galileo can also show

you what the decompression schedule

would be if you were to ﬁ nish the dive using

only the gas mixture that you are currently

breathing from, so that you can be prepared

in the event that something did not work as

planned.

WARNING

- Diving with more than one gas mixture

represents a much higher risk than diving

with a single gas mixture, and mistakes

by the diver may lead to serious injury or

death.

- During dives with more than one gas

mixture, always make sure you are

breathing from the tank that you intend to

breathe from. Breathing from a high oxygen

concentration mix at the wrong depth can

kill you instantly.

- Mark all your regulators and tanks so

that you cannot confuse them under any

circumstance.

- Before each dive and after changing a tank,

ensure that each gas mixture is set to the

correct value for the corresponding tank.

Galileo enables you to use up to three gas

mixtures during the dive (air and Nitrox only).

The three mixtures are labeled T1, T2 and TD

and must be in ascending order of oxygen

content, i.e. T1 has the lowest oxygen

concentration, T2 an intermediate value, and

TD has the highest oxygen concentration of

the three. Two or more tanks can also be

set to the same oxygen concentration. If you

are diving with only two mixtures, you will be

utilizing tanks T1 and TD.

Galileo can show the tank pressure of

each tank if the corresponding ﬁ rst stage

regulator is equipped with an UWATEC

Smart transmitter, paired as described

in section 1.11. Note that Galileo can be

programmed and used for diving with more

than one gas mixture whether you use

transmitters or not.

3.7.1 Setting the oxygen

concentration when diving with

more than one gas mixture

To set the oxygen concentration for tanks

T1, T2 and TD you need to access the O

setting menu as described in section 2.2.

The look of the menu, however, changes

slightly when PMG is set to ON in that the

ﬁ rst line now shows the tank designation

and the word ON or OFF next to it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

UWATEC Galileo Sol Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von UWATEC Galileo Sol

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info