Bedienungsanleitung UWATEC Galileo Sol (Seite 65 von 80) (Englisch)

550277

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

3. Diving with Galileo

English

(marked MORE). The gas summary table

stays on the display for a maximum of

12 seconds, after which Galileo reverts to

the regular computer display. Pressing the

middle button while the gas summary table

is displayed brings up the deco summary

table, explained in the next section.

3.7.3 Deco summary table

Galileo shows you the predictive multi

gas decompression calculation on the

main computer screen. However, in the

background it is also calculating what the

decompression would be if you were to

ﬁ nish the dive with just the gas mixture

that you are currently breathing from. If you

are diving with an MB level higher than L0,

Galileo also computes both the predictive

multi gas decompression calculation and

the current gas only calculation for L0. All

these calculations are shown at once in the

deco summary table.

During the dive, from the gas summary

table, press the middle button to access

the deco summary table. On the top row,

with label PMG L5 (or whichever MB level

is active) you see the predictive multi gas

decompression calculation at the active

MB level. This is the same as on the main

computer screen. Underneath it, with label

1G L5 (or whichever MB level is active) you

see the decompression calculation for the

active MB level if you were to ﬁ nish the

dive with the gas mixture you are currently

breathing. Next is the row with label PMG

L0, showing the predictive multi gas

decompression calculation for L0 (this is

what you see in the MORE sequence also),

followed by row 1G L0, showing the single

gas decompression calculation at L0 for

the gas you are currently breathing from.

The ﬁ rst two rows described here do not

appear if Galileo is set to L0.

The deco summary table stays on the

display for a maximum of 12 seconds, after

which Galileo reverts to the regular computer

display. Pressing the middle button while

the deco summary table is displayed brings

up the dive proﬁ le, as described in section

3.4.4. In the case of dives with more than one

mixture, Galileo adds a solid line indicating

the MOD for the various gas mixtures. The

vertical line then represents the predicted

time and depth of the switch.

3.7.4 Switching gas mixture during

the dive

During the ascent phase, when you reach a

depth corresponding to the MOD of T2 or

TD, Galileo will suggest that you perform the

switch. An audible sequence goes off, and

the message SWITCH TO GAS T2 (or TD)

appears on the display. Simultaneously, the

labels of the left and middle buttons change

to SAVE and >>, respectively. You have 30

seconds to respond to this message, else

Galileo will consider that tank T2 (or TD)

never existed and adapts the decompression

schedule accordingly. You can:

- Press or press and hold SAVE to

conﬁ rm the gas switch.

- Press or press and hold >> to choose

the next gas in sequence, after which

you would still have to press or press

and hold SAVE to conﬁ rm the switch.

- Press and hold the right button to

terminate the gas switch procedure

without carrying out any switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

UWATEC Galileo Sol Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von UWATEC Galileo Sol

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info