Bedienungsanleitung UWATEC Galileo Sol (Seite 67 von 80) (Englisch)

550277

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

3. Diving with Galileo

English



NOTE:

If after Galileo has changed the

decompression schedule to reﬂ ect the

missed gas switch, you descend again

below the MOD for the gas mixture you

did not switch to, Galileo reintroduces

that gas into its calculations and the

decompression schedule changes

accordingly. This is accompanied by

the display message INCLUDING T2

(or TD) AGAIN for 4 seconds.

3.7.5.3 Belated gas switch

You can catch up on a planned gas mixture

switch at any time by selecting the gas

manually. Press and hold the left button to

start the gas switch procedure. Galileo will

show the message SWITCH TO GAS T2

(or TD), and its MOD. This helps you verify

that you are performing a switch to a safe

gas. The button labels change to SAVE (left)

and >> (middle). Use >> to choose the next

tank you want to use, then press or press

and hold SAVE to conﬁ rm the switch.

Galileo will display the message SWITCH

TO GAS T2 (or TD) SUCCESSFUL

and adapt the decompression schedule

accordingly. If you want to interrupt the

gas switch procedure, press and hold the

right button.

3.7.5.4 Manual gas switch at a depth

deeper than its MOD

There may be situations in which you have

no other choice but to switch to a different

gas mixture although you are below the

MOD for that mixture. Galileo does not

prevent you from doing this, but the MOD

alarm will immediately go off.



NOTE:

It is not dangerous to switch the

computer to a gas mixture below its

MOD, but rather it is dangerous to

breathe a gas mixture below its MOD.

Galileo alerts you of the imminent

danger when you do so.

3.7.5.5 Submerging below the MOD

after a gas switch

If after having switched to a gas mixture

with a higher oxygen concentration you

inadvertently drop again below the MOD

for that mixture, the MOD alarm will

immediately go off. Either switch back to a

gas mixture suited for that depth, or ascend

above the MOD for the gas mixture you are

breathing from.

3.7.6 RBT when diving with more

than one gas mixture

Galileo determines the RBT based on

your breathing pattern. The tanks with

the various gas mixtures you have with

you may be of different sizes, therefore

the RBT calculation cannot be extended

to all tanks at once since your breathing

pattern will be different for each tank. Since

Galileo performs several decompression

calculations simultaneously for all possible

combinations of gas mixtures, the RBT

calculation references the decompression

calculation that considers only the gas you

are currently breathing from.

- If you have programmed 2 or 3 gases

and are currently breathing from T1,

the RBT will be for the decompression

schedule that considers T1 only.

- If you have programmed 3 gases and

are currently breathing from T2, the RBT

will be for the decompression schedule

that consider T2 only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

UWATEC Galileo Sol Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von UWATEC Galileo Sol

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info