Bedienungsanleitung V-Zug DW-S9 (Seite 15 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

503581

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

GENERAL

Carefullyread the following important information regarding

installation safety and maintenance. Keep this information

bookletaccessible for further consultations.The appliance has

been designed for use in the ducting version (air exhaust to

the outside – Fig.1B), ltering version (air circulation on the

inside – Fig.1A) or with external motor (Fig.1C).

SAFETY PRECAUTION

1. Take carewhen thecooker hoodisoperating simultaneously

with an open replace or burner that depend onthe air in the

environmentand are supplied by otherthan electrical energy,

as the cooker hood removes the air from the environment

whicha burner or replaceneed for combustion.Thenegative

pressurein the environmentmustnot exceed 4Pa(4x10-5bar).

Provide adequate ventilation in the environment for a safe

operation ofthe cooker hood. Follow thelocal laws applicable

for external air evacuation.

Before connecting the model to the electricity network:

-Control the data plate (positioned inside the appliance)

to ascertain that the voltage and power correspond to the

network and the socket is suitable. If in doubt ask a qualied

electrician.

-If the power supply cable is damaged, it must be replaced

with another cable or a special assembly, which may be

obtained direct from the manufacturer or from the Technical

Assistance Centre.

2. Warning!

In certain circumstances electrical appliances may be a

danger hazard.

A)Do not check the status of the lters while the cooker

hood is operating.

B)Do not touch bulbs or adjacentareas, during or straight

after prolonged use of the lighting installation.

C)Flambè cooking is prohibited underneath the cooker

hood.

D)Avoid free ame, as it is damaging for the lters and a

re hazard.

E) Constantly check food frying to avoid that the

overheated oil may become a re hazard.

F) Disconnec t the electric al plug prior to any

maintenance.

G)Thisappliance isnotintendedforuse by youngchildren

or inrm persons without supervision.

H) Young childrenshould besupervisedto ensure they do

not play with the appliance.

I) There shall be adequate ventilation of the room when

the rangehood is used at the same time as appliances

burning gas or other fuels.

L) There is a risk of re if cleaning is not carried out in

accordance with the instructions.

This applianceconformstotheEuropeanDirectiveEC/2002/96,

Waste Electrical and ElectronicEquipment (WEEE). By making

sure that this appliance is disposed of in a suitable manner,

the user is helping to prevent potential damage to the

environment or to public health.

The

symbol on the product or on the accompanying

paperwork indicates that the appliance should not be treated

as domestic waste, but should be delivered to a suitable

electric and electronic appliance recycling collection point.

Follow local guidelines when disposing of waste.

For more information on the treatment, re-use and recycling

of this product, please contact your local authority, domestic

waste collection service or the shop where the appliance

was purchased.

INSTALLATION INSTRUCTIONS

Assembly and electrical connections must be carried out

by specialised personnel.

• Electric Connection:

This is a class I, appliance and must therefore be connected

to an eecient earthing system.

-The appliance must be connected to the electricity supply

as follows:

BROWN = L line

BLUE = N neutral

YELLOW/GREEN =

earth.

The neutral wire must be connected to the terminal with the

N symbolwhile the YELLOW/GREEN, wire must be connected

to the terminal by the earth symbol

When connecting the appliance to the electricity supply,

make sure that the mains socket has an earth connection.

After tting the ducted cooker hood, make sure that the

electrical plug is in a position where it can be accessed easily.

If the appliance is connected directly to theelectricity supply,

an omnipolar switch with a minimum contact opening of

3 mm must be placed in between the two; its size must

be suitable for the load required and it must comply with

current legislation.

• If thehob is electric,gas, or induction,the minimum distance

between the same and the lower part of the hood must be

at least 65 cm. If a connection tube composed of two parts is

used, the upperpart must be placedoutside the lower part. Do

not connect the cooker hood exhaust to the same conductor

used to circulate hot air or for evacuating fumes from other

appliances generated by otherthanan electrical source.Before

proceeding with the assembly operations, remove the anti-

grease lter(s) (Fig.5) so that the unit is easier to handle.

• We recommendthe use of anair exhaust tube which has the

same diameter as the air exhaust outlet hole. If a pipe with

a smaller diameter is used, the eciency of the product may

be reduced and its operation may become noisier.

In thecase of assembly ofthe appliancein the suction version

prepare the hole for evacuation of the air.

• Fixing to the wall:

-Drill the holes A respecting the distances indicated (Fig.2).

-Fix theappliance to thewalland align it inhorizontal position

to the wall units.

-When the appliancehasbeenadjusted,denitelyxthehood

using the screws A (Fig.4).

-For the various installations use screws and screw anchors

suited to the type of wall (e.g. reinforced concrete, plaster-

board, etc.).

If the screwsand screwanchors are providedwiththe product,

check that they are suitable for the type of wall on which the

ENGLISH

- 15 -

V-Zug DW-S9 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info