POWDPG80460 EN
Copyright © 2021 VARO P a g e | 10 www.varo.com
▪ Never blow through nozzles or other components by mouth.
▪ Avoid contact with plant control chemicals – immediately change clothing contaminated
with plant control chemical.
▪ Do not spray in windy conditions.
▪ Too high or too low a pressure or unfavorable weather conditions can result in the wrong
solution concentration. Overdosing may damage plants and the environment. Underdosing
may result in unsuccessful plant treatment.
▪ In order to reduce the risk of damage to the environment and plants, do not operate the
sprayer: i. pressure is too high or too low
ii. in windy conditions
iii. in direct sunlight
▪ In order to reduce the risk of accidents and damage to the sprayer, never operate the
sprayer with: i. flammable liquids
ii. viscous or sticky liquids
iii. caustic or corrosive chemicals
iv. liquids hotter than 50°C
▪ Avoid use the product in cold winter since the solution may be freeze.
10.4 Transportation and storage
▪ Remove the battery pack.
▪ Ensure that all parts are clean and dry.
▪ Clean all foreign materials from the product.
▪ Drain all spray materials from the spray tank before storage and transportation.
▪ After each use, check all parts of the unit for leaks. Return the product to an authorized
service center for repair if has any.
▪ The spray wand can be stored in the cradle.
▪ For transportation, secure the product against movement or falling to prevent injury to
persons or damage to the product.
▪ Store the product in a cool, dry and well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden chemicals and de-icing salts. Do not
store outdoors.
11 ASSEMBLY
WARNING: Switch off and remove battery from machine before adjusting or
cleaning!
11.1 Assembling the strap
▪ Attach the strap (15) to the sprayer as shown in fig.4.
11.2 Assembling the spray nozzle
▪ Install the gun bar and nozzle of choice on the gun handle as shown in fig.5.
12 OPERATION
12.1 Turning the sprayer ON/OFF (Fig.6 )
▪ To turn the sprayer ON, depress the ON/OFF button (16).
▪ To start the flow of liquid at the spray wand, depress the trigger (12).
▪ To stop the flow of liquid at the spray wand, release the trigger (12).
▪ To turn the sprayer OFF, depress the ON/OFF button again (16).
