Bedienungsanleitung VAX Cadence V 094 (Seite 3 von 4) (Englisch)

540971

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

4 5

2. Safety Information

FOR HOUSEHOLD USE ONLY

When using the vacuum cleaner, basic safety

precautions should always be observed, including

the following:

1. Only use the vacuum cleaner indoors on dry

surfaces.

2. Turn off the vacuum cleaner controls before

connecting or disconnecting from the mains

supply.

3. Always unplug the vacuum cleaner before

connecting or disconnecting the vacuum hose

and accessories.

4. Close attention is necessary when used by or

near children. Do not allow children to use as

a toy.

5. Use only as described in this manual.

Use only the manufacturer’s recommended

attachments.

6. Do not use the vacuum cleaner if it has been

dropped, damaged, left outdoors or dropped

into water. Do not use the vacuum cleaner with

a damaged cord or plug. If the supply cord or

plug is damaged, return the vacuum cleaner to

a Vax Authorised Service Agent or suitably

qualified person for examination, repair or

adjustment.

7. Do not pull or carry by the cord. Do not use the

cord as a handle, close a door on the cord or

pull the cord around sharp edges or corners.

Do not run the vacuum cleaner over the cord.

Keep the cord away from heated surfaces.

8. Do not handle the plug or vacuum cleaner with

wet hands. Do not use outdoors or on wet

surfaces.

9. Do not put any objects into openings. Do not

use with any openings blocked and do not

restrict air flow. Keep all openings free of dust,

lint, hair or anything that may reduce airflow.

10. Keep hair, loose clothing, fingers and all parts

of the body away from openings and moving

parts.

11. Do not pick up hot coals, cigarette butts,

matches or any hot, smoking or burning

objects.

12. Do not pick up flammable or combustible

materials (lighter fluid, petrol, kerosene, etc) or

use in the presence of explosive liquids or

vapours.

13. Do not vacuum up harmful or toxic material

(chlorine bleach, ammonia, drain cleaner, etc).

14. Do not vacuum up hard or sharp objects such

as glass, nails, screws, coins, etc.

15. Do not use without the filters in place.

16. Take extra care when vacuuming on stairs.

17. Keep vacuuming area well lit.

18. Store the vacuum cleaner indoors in a cool, dry

area.

19. Turn off the on/off switch before unplugging the

vacuum cleaner.

20. Use only CE-approved 13 amp extension

cords. Non-approved extension cords may

overheat. Care should be taken to arrange the

cord so that the cord cannot be pulled or

tripped over.

WARNING: Always switch off and unplug the

vacuum cleaner from the electrical outlet

before assembling, opening or emptying the dirt

container, or before connecting/disconnecting the

attachments.

CAUTION: The vacuum cleaner is a very powerful

unit. Before plugging the cord into the electrical

outlet, make sure the switch is in the ‘off’ position.

Hold the vacuum cleaner firmly when starting and

in use.

IMPORTANT: If the inlet, hose or telescopic tube is

blocked, switch off the vacuum cleaner and remove

the blockage(s) before re-starting the vacuum

cleaner.

IMPORTANT: Washing filters improves vacuum

performance. Make sure all the filters are

completely dry before inserting back into the

vacuum cleaner.

This vacuum cleaner is intended for household use

only and not for commercial or industrial use.

Motor Thermostat

IMPORTANT:

The motor is equipped with a

thermal cut-out. If for any reason, the vacuum

cleaner should over-heat, the thermostat will

automatically turn the unit off. Should this occur,

unplug the vacuum cleaner from the electrical

outlet and turn the unit off. Remove the dirt

container and empty. Clean the filters. Allow the

cleaner to cool for appr

oximately one (1) hour. To

re-start, plug into an electrical outlet and switch

back on.

3. How to Assemble

IMPORTANT: Always unplug the vacuum cleaner

from the electrical outlet before assembling or

removing the accessories.

. Insert the flexible hose into the inlet on the main

body of the vacuum cleaner. Push in until it

clicks into position (Fig.3/1).

2. Push the telescopic extension tube on to the

end of the handle (Fig.3/2).

3. The telescopic extension tube can be

lengthened or shortened by pushing the button

in and sliding the tube apart or together as

required (Fig.3/3).

4. 4. Fit the combination floor head by pushing

onto the extension tube (Fig. 3/4).the extension

tube (Fig.3/4).

4. How to Operate

Cor

d Release

Fully unwind the power cord. A yellow mark on the

power cord indicates the recommended cord

length. Do not exceed the cord length beyond the

red mark.

On/off Button

1. Insert the power plug into the electrical outlet.

Make sure the vacuum cleaner is switched off.

2. Press the on/off switch located on the top of

the vacuum cleaner, to switch on the vacuum

cleaner and press the button again to turn the

vacuum cleaner off.

Carpet Cleaning

For carpet and rug cleaning, press the rocker

switch on the combination floor head to raise the

brushes.

Hard Floor Cleaning

For hard floor cleaning, press the rocker switch on

the combination floor head to lower the brushes.

Cord Rewind

To rewind the power cord, press the cord rewind

button, located on the top of the vacuum cleaner,

and guide the power cord with one hand. This will

prevent the cord from whipping which could cause

damage or injury.

Carry Handle

Use the carry handle located on the top of the

vacuum cleaner or the front to move from room to

room.

Hose Storage

For convenience there is a slot located on either the

back or the base of the vacuum cleaner where the

floor tool and hose can be parked for carrying and

storage.

5. Accessories

1. The accessories can be attached directly to the

handle by removing the telescopic tubes and

pushing in the desired accessory.

2. The accessories can also be attached to the

telescopic extension tube for extra reach.

Remove the combination floor head and push

on the desired accessory.

Crevice tool: For crevices, corners and cracks, etc.

Dusting brush: For delicate surfaces.

Upholstery tool: For carpet, upholstery, stairs, etc.

Turbobrush (Model: V-094TB, V-094TT,

V-094TH only): For pet hair and larger carpeted

areas. (NOTE: not recommended for hard floors).

urboTool (Model: V-094TT only):

For pet hair

upholstery and stair cleaning. The T

urboTool

should be pulled backwar

ds for optimum cleaning.

Har

d floor brush (Model: V

-094TH only):

For

har

d floor

, par

quet and laminate coverings.

afety Information

ow to Assemble / How to Operate / Accessories

Fig.3/1

Fig.3/2

Fig.3/3

Fig.3/4

V-094 amended aw 1/11/05 11:16 am Page 5

VAX Cadence V 094 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info