622301
7
Zoom out
Zoom in
Vorherige Seite
1/110
Nächste Seite
DVM894
V. 01 21/01/2015 7 ©Velleman nv
5. Pollution Degree
IEC 61010-1 specifies different types of pollution environments, for which different
protective measures are necessary to ensure safety. Harsher environments require
more protection, and the protection against the pollution which is to be found in a
certain environment depends mainly on the insulation and the enclosure
properties. The pollution degree rating of the DMM indicates in which environment
the device may be used.
Pollution
degree 1
No pollution or only dry, nonconductive pollution occurs. The pollution
has no influence (only to be found in hermetically sealed enclosures).
Pollution
degree 2
Only nonconductive pollution occurs. Occasionally, temporary
conductivity caused by condensation is to be expected (home and
office environments fall under this category).
Pollution
degree 3
Conductive pollution occurs, or dry nonconductive pollution occurs
that becomes conductive due to condensation that is to be expected
(industrial environments and environments exposed to outside air -
but not in contact with precipitation).
Pollution
degree 4
The pollution generates persistent conductivity caused by conductive
dust or by rain or snow (exposed outdoor environments and
environments where high humidity levels or high concentrations of
fine particles occur).
Warning: This device was designed in accordance with EN 61010-1 pollution
degree 2. This implies that certain restrictions in use apply that are related to
pollution which can occur within the environment of use. Refer to the table above.
THIS DEVICE IS ONLY SUITABLE FOR MEASUREMENTS IN POLLUTION
DEGREE CLASS 2 ENVIRONMENTS.
6. Overview
Refer to the illustrations on page 2 of this manual.
1
LCD display: 3 ½ digits, 2000 counts
2
power button
3
HOLD: to hold the last reading
4
rotary switch: to select functions and the desired ranges
5
input sockets
Display
low battery
Warning: To avoid false readings, which can possibly
lead to electric shocks or personal injury, replace the
battery as soon as the battery indicator appears.
negative input polarity indication
HV
high-voltage symbol (600 VAC or 600 VDC)
HOLD
data-hold mode
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Velleman DVM894 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info