Bedienungsanleitung Vermont Castings Montpelier II (Seite 11 von 32) (Englisch)

815505

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

11 04/237101-803R

Figure 11.1

Start-up Air Control

To activate: Push back until it stops

Air quality is important to all of us, and if we choose to use

wood to heat our homes we should do so responsibly. To do

this we need to learn to burn our appliances in the cleanest

way possible. Doing this will allow us to continue using our

wood appliances for many years to come.

G. Start-Up Air Control

When using the start-up air control system, you do not

have to continually monitor the re. Once you set the start-

up air control system it will control the re for you. Follow

the instructions below to learn how to operate your stove

with ease.

H. Burn Rates and Operating E󰀩ciency

For maximum operating e󰀩ciency

• Burn dry, well-seasoned wood.

• Follow these burn rate instructions below.

Burn Rate

1. Starting a Fire:

- Load appliance with wood and start re (reference

Quick Start Guide on page 6).

- Activate start-up air control.

2. Reloading:

- Add wood as needed.

- Activate start-up air control.

NOTE: If using the blower should be o󰀨 for the rst 30

minutes and then be operated in the desired setting at

30 minutes.

This wood appliance has a manufacturer-

set minimum low burn rate that must not be

altered. It is against federal regulations to

alter this setting or otherwise operate this

pellet insert in a manner inconsistent with

operating instructions in this manual.

WARNING

3. Adjusting the Burn Rate:

The Montpelier II Insert is designed to optimize e󰀩ciency

at all times. Since there are no user controls to adjust

the burn rate, the easiest method is to learn how many

logs you need at a time for the amount of heat desired.

In addition to the amount of wood and the size of the

logs, take the time to experiment with split and unsplit

logs as split logs will burn faster than unsplit logs.

I. Wood Fuel

Hardwood vs Softwood

Your appliance performance depends on the quality of the

rewood you use.

• Seasoned wood contains about 8,000 BTUs per pound.

• Hard woods are more dense than soft woods.

• Hard woods contain 60% more BTUs than soft woods.

• Hard woods require more time to season, burn slower

and are harder to ignite.

• Soft woods require less time to dry, burn faster and are

easier to ignite.

• Start the re with softwood to bring the appliance up to

operating temperature and to establish draft.

• Add hardwood for slow, even heat and longer burn time.

Fire Risk.

• DO NOT BURN GARBAGE OR

FLAMMABLE FLUIDS SUCH AS

GASOLINE, NAPHTHA OR ENGINE OIL.

• Do NOT burn treated wood or wood with

salt (driftwood).

• May generate carbon monoxide if burn

material other than wood.

May result in illness or possible death.

WARNING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vermont Castings Montpelier II Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vermont Castings Montpelier II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info