Bedienungsanleitung Vibiemme Domobar Super (Seite 11 von 44) (Englisch)

783524

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

4 - Operation of Each Model

The three models of the Vibiemme Domobar Super espresso machines contain the same basic components.

They also share a few external similarities. This chapter covers the controls and basic operation of all three mod-

els. Let’s begin with the components common to all models which are on the front panel:

On the far left side of the panel is the boiler pressure gauge. This displays the pressure in the boiler which in-

directly supplies you with the water temperature in the boiler. The higher the

pressure, the higher the temperature. While the machine is idling this gauge

will move upwards when the heating element is on, and will slowly move

downwards when the heating element is off. Generally speaking, a reading

of about .9 to 1.1 should be expected. The gauge will ﬂuctuate in a range of

about .15 in normal operation when the machine is idling (on, but not being

used). Each division is .05 BAR (.73 psi).

The indicator lamp to the left of the boiler pressure gauge indicates heat-

ing element activity. When the heating element is energized the lamp will be

illuminated as seen here.

The gauge on the right side of

the display panel displays the pressure in the brewing path during an

espresso pull. This gives a general indication as to what is happening

during the brewing cycle. The only time when the gauge will display any

useful information is when the brewing process is underway. At all other

times, even when the pump is reﬁlling the boiler, this gauge is not dis-

playing any useful information and should be ignored. About 9 BAR is a

good place to be brewing as you get started. Each division is .5 BAR.

To the left of the brew pressure gauge is the water level indica-

tor lamp. If this is illuminated it means that the water reservoir needs

to be reﬁlled and the machine will not operate until this task has been

completed. In this photo the lamp is off indicating that the reservoir has

sufﬁcient water to operate.

To the right of the brew pressure gauge is the power indicator. This lamp is illuminated (as seen here) when

the machine is plugged into an electrical outlet and the machine is switched to either the I or the II position. The

indicator lamps make it easy to judge the machine’s state at a glance.

The three models differ in how the brew function is operated and the design and function of the related user

interface. How each works is explained below:

Manual Model

The manual model is the most

traditional representation of the E-61

grouphead in the Domobar line, and

its operation is quite simple. This ma-

chine is manual in its function with

only one switch controlled by a lever

on the grouphead itself.

Here you see the manual con-

trol lever on the right side of the E-

61 grouphead. It is shown in its at-

rest position. This is where the lever

should be whenever the machine is

not brewing espresso.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vibiemme Domobar Super Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info