Bedienungsanleitung VibroShaper M12156 (Seite 11 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

813572

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SAFETY INFORMATION

Please read this user guide through carefully before using your VibroShaper to prevent injuries and damage to the device.

• The maximum weight for the device is 100kg.

• Damage to health is possible when overdoing the training activity or training improperly or incorrectly with the device.

• When users have not practised sport for some time, or have heart, circulation or orthopaedic problems, they should consult

their doctor before using the device.

• People with high blood pressure, bronchitis, skin diseases, diabetes, physical limitations or other ailments may only use this

device under the supervision of a doctor.

• The VibroShaper is not suitable for people with osteoporosis, cancer, heart problems, a pacemaker, a prothesis or another

implanted medical device.

• Older people should use this device properly and under supervision.

• The device is not suitable for women who are pregnant or menstruating.

• Children must not be allowed to use this device as a toy.

• This device is not designed to be used by adults or children whose sensory, physical or mental capacity is reduced or

restricted, or who have a lack experience or knowledge, unless they are shown how the device works or are supervised by

someone who is responsible for their safety.

• Do not poke ﬁngers or foreign bodies into the space between the middle and bottom panels of the device.

• Do not use the device after consuming alcohol.

• Wait at least one hour after eating before using the device.

• Before using your VibroShaper, place it on a ﬂat, stable and even ﬂoor or mat.

• Ensure it is positioned at least 100 cm from the wall and any other objects nearby. (Figure 4)

• Before using the device, remove jewellery, your mobile phone and any other valuables, keys and sharp

objects from your person to avoid damage or injuries.

• To avoid injuries, do not jump or kneel down on the device while it is running.

• Only one person at a time may ever stand on the device.

• To prevent the device from tipping over, do not rest more weight on one side than on the other.

• Do not place any other devices or objects on your VibroShaper in addition to your own weight.

• If there are ﬂuctuations in your electricity supply, do not use the device and unplug it immediately.

• Keep the device away from damp areas and direct sunlight, and do not leave it outside.

• Always keep the device away from liquids. Do not touch it with wet hands, move it suddenly or jerkily, and never smoke

when using it.

• If there are problems with the power switch, do not touch the device; if you do, you could get an electric shock.

• Do not use the device if the room temperature exceeds 40 °C.

• Only connect your VibroShaper to an electricity supply that is compatible with the device’s technical data and complies

with the instructions.

• Be careful when pressing the power switch.

• Do not kink the cable or touch it with wet hands.

• Stop using the device and unplug it immediately if a thunderstorm starts outside.

• To avoid any electrical interference, do not plug any other devices with a high power demand into the same socket as

your VibroShaper.

• Only transport the device as per the diagram and the instructions regarding this.

• Never store inﬂammable substances near the device.

•

Do not use new and old batteries or batteries of different brands together in the remote control.

•

This equipment complies with EN ISO 20957-1 class HB (H = domestic use, B=medium precision).

•

The resistance band can take a strain of a maximum of 8.5 kg or 155 cm. All exercises prescribed in the training plan fall within

this limit.

USING YOUR VIBROSHAPER FOR THE FIRST TIME

• To transport your VibroShaper, grip the handle on the right-hand side of the device and tilt the

device until its wheels touch the ﬂoor. Then pull the handle to move the device carefully.

• Ensure that the VibroShaper is standing on a ﬂat, stable and even ﬂoor or mat andthat the device

is positioned at least 100 cm from walls and other objects when you stop.

• When using your VibroShaper for the ﬁrst time, you should sit on a chair and place your feet on

the device. Now turn on the device to test the intensity of the movements. This allows you to get

used to the oscillations and your chosen operating mode.

• Always wear comfortable clothing and footwear when training.

100 cm

Figure 4

Handle

Transport wheels

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VibroShaper M12156 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von VibroShaper M12156

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info