Bedienungsanleitung Viessmann VITOTRONIC 200 (Seite 9 von 112) (Englisch)

813781

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Intended use presupposes that a fixed installation in

conjunction with permissible, system-specific compo-

nents has been carried out.

Commercial or industrial usage for a purpose other

than central heating/cooling or DHW heating shall be

deemed inappropriate.

Incorrect usage or operation of the appliance (e.g. the

appliance being opened by the system user) is prohibi-

ted and will result in an exclusion of liability. Incorrect

usage also occurs if the components in the heating

system are modified from their intended function.

Note

The appliance is intended exclusively for domestic or

semi-domestic use, i.e. even users who have not had

any instruction are able to operate the appliance

safely.

Product information

Heat pump control unit

The Vitotronic 200 heat pump control unit, type WO1C

controls all functions of your heating system with heat

pump and mechanical ventilation.

The heat pump control unit may be installed in different

locations depending on the type of heat pump: See

page 15.

■At the front of the heat pump

■At the top of the heat pump

■In a separate enclosure on the wall

Heat pump types

Air/water heat pumps

Air/water heat pumps utilise energy from the ambient

air to generate heat. To achieve this, a fan draws the

ambient air through a heat exchanger (evaporator). In

the evaporator, the thermal energy from this ambient

air is transferred to the refrigerant circuit. Here, the

temperatures necessary for central heating and DHW

heating are generated. The refrigerant circuit is driven

by the compressor.

To provide central cooling, the refrigerant circuit oper-

ates in reverse mode. Heat is extracted from your

rooms and transferred to the ambient air via the evap-

orator.

Note

Air/water heat pumps can have two stages. Two-stage

air/water heat pumps have 2 compressors which can

be activated individually or simultaneously subject to

the requested heating output.

Air/water heat pumps are available in the following

casing/installation versions:

Heat pump for indoor installation

■All of the heat pump components, including the heat

pump control unit, are housed in a casing and instal-

led inside the building. The outdoor air is brought to

the heat pump and returned to the outside via an air

duct system.

Heat pump for outdoor installation

■All of the heat pump components, except for the heat

pump control unit, are housed in a casing that is

installed outside the building. The heat pump control

unit is mounted inside the building. The heat pump is

hydraulically connected to the heating system of the

building.

Air/water heat pumps with separate indoor/outdoor

units

The outdoor unit is installed outside the building or fit-

ted to the outside of the building. Heat is obtained from

the ambient air in the outdoor unit.

The indoor unit, including the heat pump control unit, is

installed inside the building and transfers the heat to

the heating system.

The indoor and outdoor units are connected to each

other hydraulically and electrically.

Introductory information

Intended use (cont.)

5817913

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viessmann VITOTRONIC 200 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Viessmann VITOTRONIC 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info