Bedienungsanleitung View Quest Bardot (Seite 11 von 22) (Englisch)

594797

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

GB GB

Bardot Operation Guide

2. Once the scanning is complete the DAB/DAB+ stations will be displayed in alphanumeric order. The rst

station in the list will be selected.

Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a

stronger signal area. Websites such as www.ukdigitalradio.com in the UK feature handy postcode

nders that will tell you what DAB channels you can expect to receive.

Selecting another DAB/DAB+ Station

While a program is playing, turn the –TUNING + knob to cycle through available stations, and then press

the –TUNING + knob to conrm the station you want to play.

Updating the Stations List

Press the MENU button, turn the –TUNING+ knob to select Full scan, and then press the –TUNING + knob

to conrm. Scan will commence.

Displaying Signal Strength

While playing a DAB/DAB+ program, repeatedly press the INFO button until the display shows a signal bar

indicating the strength of the current station.

Manual Tuning

1. Press the MENU button, turn the –TUNING+ knob to select Manual tune, and then press the

–TUNING+ knob to conrm. The display will show the channel number and frequency.

2. Turn the –TUNING+ knob to step through the channels and then press the –TUNING+ knob to select the

current channel.

Note: If there is a multiplex corresponding to this channel and frequency, then after a few

seconds the display will show a tuning meter with the signal strength and the multiplex.

Getting Started

Carefully remove your Bardot from its box. You may wish to store the packaging for future use.

Inside the box you will nd:

- Your Bardot

- Power Adapter with plugs for UK and mainland Europe

- User Manual

Positioning your Bardot

Place your Bardot on a at / stable surface, with reference to the safety information section in this manual.

Adjusting the Aerial

The aerial should be extended to ensure you receive the best signal possible in both DAB and FM radio

modes. Later on it may be necessary to alter the position of your Bardot and its aerial to achieve the best

reception.

Turning the Unit On and Off

1. Connect the plug at the end of power adapter cable to the DC in jack on the back of your Bardot. Insert

the power adapter into the mains socket.

2. Turn the mains power on and then press the POWER button to turn on the unit.

Pressing the POWER button again switches your Bardot to standby mode. To switch the unit off

completely, unplug the power adapter from the mains socket.

Volume Control

Adjust the radio volume by turning the – VOLUME + knob.

Using DAB Mode

Note: When you turn on the radio it will automatically search and store all the available

stations. You should conduct an additional Full Scan to ensure all stations are picked up and

stored. It is also recommended every few months to run a new scan to pick up any new DAB/

DAB+ stations that may have begun broadcasting after purchasing your Bardot.

1. Repeatedly press the SOURCE button until DAB is shown on the display. For the rst time your Bardot

will carry out a full scan and store a list of stations in memory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

View Quest Bardot Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von View Quest Bardot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info