Bedienungsanleitung View Quest Bardot (Seite 12 von 22) (Englisch)

594797

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

GB GB

Bardot Operation Guide

Using FM Mode

Selecting FM Mode

1. Press the SOURCE button repeatedly until FM is displayed.

2. On rst use the display will show 87.50MHz, the start of the FM frequency range. Otherwise, the last

listened-to FM station will be selected.

Scanning for FM Stations

1. To manually scan FM stations, while frequency is displayed, turn the –TUNING+ knob clockwise/

anticlockwise to increase/decrease frequency by 0.05MHz per step.

2. To automatically scan, turn the –TUNING+ knob clockwise or anticlockwise and then press the –TUNING+

knob.

Your Bardot will scan forwards or backwards until it reaches the next available station. To scan forwards,

turn the –TUNING+ knob clockwise before pressing it. To scan backwards turn the –TUNING+ knob

anticlockwise before pressing it.

Setting Scan Preferences

By default, FM scans stop at any available station. This may result in tuning to a weak station, resulting in

poor sound quality. Your Bardot helps you avoid weak stations.

1. To change the scan settings to stop only at stations with good signal strength, press the MENU button,

turn the –TUNING+ knob to select Scan Setting, and then press the –TUNING+ knob to conrm.

2. Turn the –TUNING+ knob to select ‘Strong stations only’, and press the –TUNING+ knob to conrm your

selection.

Forcing mono for weak stations

By default, all stereo stations are reproduced in stereo. For weak stations, this may result in poor sound

quality. Your Bardot can offset this effect by playing weak stations in mono.

1. To play weak stations in mono, press the MENU button, turn the –TUNING+ knob to select Audio setting,

and then press the –TUNING+ knob to conrm.

2. Turn the –TUNING+ knob to select ‘Forced mono’ and press the –TUNING+ knob to conrm.

3. To exit manual tune, press the –TUNING+ knob again.

Setting Dynamic Range Control (DRC)

You can set the compression level of stations to eliminate the differences in dynamic range or sound level

between radio stations. If loud stations are too loud while quiet stations are too quiet, DRC may help.

Note: DRC off indicates no compression

DRC low indicates little compression

DRC high indicates maximum compression

1. Press the MENU button, turn the –TUNING+ knob to select DRC, and press the –TUNING+ knob to conrm.

2. Turn the –TUNING+ knob to select ‘DRC high’, ‘DRC low’ or ‘DRC off’, and then press the –TUNING+ knob to

conrm your setting.

Changing Station Display Order

You may want to display your stations in a different order. Your options are:

Alphanumeric: Display all stations in alphanumeric order.

Ensemble: List currently broadcasting active stations before inactive ones.

Valid: Remove inactive stations from the station list.

1. Press the MENU button, turn the –TUNING+ knob to select Station order, and then press the –TUNING+

knob to conrm.

2. Turn the –TUNING+ knob to select ‘Alphanumeric’, ‘Ensemble’ or ‘Valid’, and then press the –TUNING+ knob

to conrm your selection.

Pruning Your Station List

This feature enables your radio to remove inactive stations from the station list.

1. Press the MENU button, turn the –TUNING+ knob to select Prune, and then press the –TUNING+ knob to

conrm.

2. Turn the –TUNING+ knob to ‘Yes’, and then press the –TUNING+ knob to conrm.

Viewing Station Information

To view currently playing station information, press the INFO button repeatedly to cycle through DLS

(Dynamic Label Segment), Signal Strength, Program Type, Ensemble, Program Frequency, Signal Quality,

Bitrate, Codec and Time and Date.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

View Quest Bardot Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von View Quest Bardot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info