667331
46
Zoom out
Zoom in
Vorherige Seite
1/332
Nächste Seite
0478 192 9803 B - EN
44
Unscrew the nut (1) from black connection
cable (2) using two A/F 8 spanners and
remove the screw (3), washer (4) and
nut (1).
Detach and remove the black connection
cable (2) from the battery negative (–)
terminal.
Detach cap (5). Unscrew the nut (1) of the
red connection cable (6) from the battery
positive (+) terminal using two A/F
8 spanners and remove. Remove the
screw (3), washer (4) and nut (1).
Remove the red connection cable (6) from
the battery positive (+) terminal.
Remove the battery if necessary.
Reattach screws, washers and nuts to
the battery negative (–) and positive (+)
terminals for safe keeping.
Close the battery compartment if
necessary. (Ö 13.14)
Connecting the battery:
Set battery down.
If necessary, remove the screws,
washers and nuts from the battery.
Attach the terminal connector of the red
connection cable (6) (+) to the battery
positive (+) terminal.
Insert the screw (3) through the bore in the
positive terminal and through the bore in
the connection cable. Fit the washer (4)
onto the screw (3) and screw on the
nut (1).
Tighten the connection to a torque of
4 - 5Nm using two A/F 8 spanners. Fit
cap (5) to completely cover the
connection.
Attach the terminal connector of the black
connection cable (2) (–) to the battery
negative (–) terminal.
Insert screw (3) through the bores in the
negative terminal and through the bore in
the connection cable. Fit the washer (4)
onto the screw (3) and screw on the
nut (1).
Tighten the connection to a torque of
4 - 5Nm using two A/F 8 spanners.
Insert the battery.
Removing the battery:
Disconnect the battery. (Ö 13.15)
Pull out the battery.
Inserting the battery:
Open the battery
compartment. (Ö 13.14)
Connect the battery. (Ö 13.15)
The charge condition should be
checked before installation.
If the battery voltage is lower than
11.5 V, recharge the battery using a
battery charger before installation.
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Viking MT 4112SZ wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Viking MT 4112SZ

Viking MT 4112SZ Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch - 350 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info