Bedienungsanleitung Visonic PowerMax Express (Seite 10 von 36) (Englisch)

580333

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

10 D-302989

By using

INSTALLER CODE

INST. CODE xxxx

NEW INST. CODE

[code]

1. NEW INSTL CODE

(see fig. 4.1a)

[code]

1. NEW INSTL CODE

NEW MASTER CODE

MASTER CODE xxxx

[code]

INST. CODE xxxx

NEW INST. CODE

By using

MASTER INSTALLER CODE

Figure 4.1c - Setting a New Installer Code

in System with Inst. & Master Inst. Codes (see note)

Note: Installer Code should never be programmed as

“0000”. Doing so will lock the user out of the installer menu!

4.2 ENROLLING WIRELESS DEVICES AND KEYFOB TRANSMITTERS

4.2.1 General Guidance

The ENROLLING mode has the following sub-modes:

• ENROLLING TYPE (wireless devices)

• ENROLL SENSORS (including wireless repeater MCX-610).

• ENROLL

KEYFOB (multi-button CodeSecure

transmitters)

• ENROLL WL 1WAY KP (wireless commander MCM-140+)

• ENROLL WL 2WAY KP (wireless 2-way keypad MKP-150/

MKP-151)

• ENROLL WL SIREN (wireless siren)

Before beginning, gather all the devices that you intend to

enroll and make sure they all have batteries installed.

Your control panel must recognize the unique identification

code (ID) of each such device in order to supervise them,

receive their signals and respond accordingly.

Attention! CodeSecure transmitters are mainly used for

arming/disarming and can not be enrolled to zones. In

order to enroll to zones, use only non-CodeSecure

wireless devices.

4.2.2 Enrolling Type

Here you determine whether to enroll a wireless device by

normal transmission or by device Tamper function

(opening its cover). Options: normal, or by tamper.

4.2.3 Enroll/Delete Sensors

Wired detector can be enrolled in zone 29 and wireless

detectors can be enrolled in zones 01-28.

STOP

• Before enrolling, the lens at the front of PIR

and dual-technology sensors should be

masked to prevent inadvertent transmission.

• Make sure that magnetic contact transmitter is

together with its magnet, to prevent it from sending

alarm transmission.

To enroll / delete wired / wireless sensors, refer to Fig. 4.2.

4.2.4 Enroll/Delete Keyfob Transmitters

Keyfob transmitters are multi-button wireless CodeSecure™

transmitters. Eight system users use them for better,

quicker and safer control over various system functions.

To enroll / delete 1-way or 2-way keyfob transmitters, refer

to figure 4.2.

4.2.5 Enroll/Delete Wireless Commander

The Wireless Commander (MCM-140+) is a remote control

unit that enables the user to remotely control the system.

To enroll / delete up to 8 wireless commanders, refer to

figure 4.2 (Enroll WL 1-way KP).

4.2.6 Enroll/Delete 2-Way Keypad

The 2-way keypad, type MKP-150/MKP-151, enables the

user to remotely control the system and also to receive

data from the system (alarm and trouble data). To enroll up

to two 2-way keypads, refer to figure 4.2.

4.2.7 Enroll/Delete Wireless Siren

The wireless siren is a remote siren that is activated upon

predefined events by the PowerMaxExpress system. To

enroll / delete up to 2 wireless sirens, refer to figure 4.2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Visonic PowerMax Express Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Visonic PowerMax Express

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info