OPERA
VERSION 06/13
4 IN 1 MUL
ITEM NO.: 40 51 71
INTENDED USE
This multi charger has been designed to charge information technology equipment such as
mobile phones or multi media devices using a charging voltage of 5 V/DC. The charging
current is 1000 mA
supply
The charging rate of your appliance must not exceed the rated current of the multi charger
Exceeding the current rate will cause the charger to overload. In case of overloading, caused
for example by short circuits or constant excess current drain, the output will be reduced.
Operation under adverse ambient conditions is not permitted.
dened as such:
• wetness or high humidity
• dust and ammable gases, vapors or solvents
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may be
damaged. In addition, improper use can cause hazards such as short circuiting, re, electric
shock etc. Read the instructions carefully and keep them. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
names and product names are trademarks of their respective owners.
DELIVER
• Multi charger MC 1.2
• 4 mains adapters (Europe, USA, England,
• 5 low voltage mains adapters (micro USB plug, mini USB plug, USB port, Nokia® Ø3.5 mm,
Nokia® Ø2.0 mm)
• USB Y adapter
• Operating instructions
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property
warranty/guarantee.
a)
• The device is not a toy
• Do not leave packaging material lying around carelessly
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
is visibly damaged,
is no longer working properly
has been stored for extended periods in poor ambient conditions or
has been subjected to any serious transport-related stresses.
• Please handle the product carefully
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• For installations in industrial facilities, follow the accident prevention regulations
for electrical systems and equipment of the government safety organization or the
corresponding authority for your country
• The product gets hot during operation. Ensure sufcient ventilation. Do not cover
the housing!
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. The plug-in
power supply unit also involves danger to life by electric shock!
to reach room temperature before connecting it to the power supply and putting it
to use. This may take several hours.
• The device was constructed according to protection class II. Only a proper mains
socket (230 V/AC, 50 Hz) of the public supply net must be used as voltage
source.
• Only use indoors in dry locations.
b)
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modications and repairs are to be performed exclusively by an
expert or at a qualied shop.
If you are not sure about the correct connection or use, or if questions arise which are not
covered by these operating instructions, please do not hesitate to contact our technical
support or another qualied specialist.
V
OPERA
The multi charger features 4 different inputs for its power supply
connected!
When connected to the power supply
the multi charger
unnecessary power consumption.
a)
1. Select an adapter suitable for your appliance.
2. The polarity is mechanically xed and cannot be modied. Connect the desired low voltage
plug properly to the external connection cable with round socket. Round sockets feature a
xed polarity (plus “+” inside, minus “-” outside).
3. Switch of
4. Regularly check the product for technical safety
5. Have repairs done by qualied experts only
inside the product will void the warranty
b)
1. The multi charger is suitable for worldwide use.
direct connection to the most common wall socket systems.
Only replace the mains adapter when disconnected from the power supply! Make
sure the mains adapter and the multi charger are securely locked!
2. Insert the mains adapter into the tting of the housing
and push until it reaches the end and locks into place.
3. In order to replace and remove the mains adapter
unlock it by pressing down the lock mechanism and
then slide the mains adapter upwards to remove.
c)
1. The multi charger features a lateral vehicle plug that can be connected to any vehicle
power supply jack featuring a direct current of 12-13.8 V
terminal to the center contact of the vehicle power supply jack.
2. In order to perform the connection, ip the housing open at the side and release the vehicle
plug. Then connect the plug to the vehicle power supply jack.
d)
1. The multi charger allows for power supply via USB ports at computers and notebooks.
2. Pull the lateral USB plug from the socket in the multi charger and connect it to a free USB
port.
Normal USB ports feed the most common appliances with a current of max.
500
Exceeding the current might cause overloading or activate the safety mechanism in
the computer or notebook.
If you require a current higher than 500 mA
use a Y adapter that combines the current of two USB ports (the multi charger limits the
charging rate to a maximum of 1000 mA). The Y
e)
The multi charger can be connected to a 9V block battery for power supply
Connect the block battery to the lateral connector intended for 9V block batteries, thereby
observing the correct polarity
prevent untimely discharging.
