Bedienungsanleitung Voltcraft 4 IN 1 MULTI (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

536355

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

CLEANING AND CARE

The multi charger is maintenance-free except for the potential replacement of the fuse.

Before cleaning or maintaining the product, make sure to observe the following safety

precautions:

Opening any covers on the product or removing parts – unless this is possible by

hand – may expose voltage-carrying components. Before cleaning or maintaining

the product, make sure to unplug any connected cables from the product and power

supply sources.

• Do not use carbon cleaning agents, benzene, alcohol or similar for cleaning. Such would

damage the surface of the product. Moreover, the fumes are harmful and explosive.

• Do not use sharp-edged screwdrivers, metal brushes or similar for cleaning.

• Use a clean, lint-free, anti-static and slightly damp cloth to clean the product. Let the

product dry completely before next use.

Replacing the fuse in vehicle operation mode

1. If charging is not possible in vehicle operation mode (power indicator does not light up),

the fuse in the vehicle plug might be defective. Replace the fuse by a new one of the same

type and rated current.

2. Unscrew the front knurled nut of the vehicle plug and then pull the center contact together

with the fuse from the plug.

3. Replace the defective fuse by a new one.

4. Thoroughly reassemble the plug. The charger should then operate normally.

Using patched-up fuses or bypassing the fuse holder is not permitted due to safety

reasons. Failure to comply could cause re or arc ash explosions.

You may order a suitable replacement fuse with order no. 52 41 77.

TROUBLESHOOTING

Please follow the safety precautions.

Problem Solution

The power indicator does not

light up.

No operating voltage?

• Check the respective power supply source for correct

operation (sufcient voltage available?)

Charger overloaded?

• Disconnect any low voltage appliances and check their

specications.

Connected appliances do not

work.

Is the output voltage of 5 V/DC suitable for the

appliance?

Is the xed polarity suitable for the appliance?

Is the power indicator on?

Is the charger overloaded?

• Check the specications of the appliances.

Any maintenance work, except for replacing the fuse, must be carried out by authorized

experts only.

Legal notice

These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 96 04 / 40 87 80

(www.voltcraft.de).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data processing

systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.

DISPOSAL

a) Product

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the relevant

statutory regulations.

b) (Rechargeable) batteries

You as the end user are required by law (Battery Ordinance) to return all used batteries/

rechargeable batteries. Disposing of them in the household waste is prohibited.

Contaminated (rechargeable) batteries are labelled with this symbol to indicate that

disposal in the domestic waste is forbidden. The designations for the heavy metals

involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)

batteries, e.g. below the trash icon on the left).

Used (rechargeable) batteries can be returned to collection points in your

municipality, our stores or wherever (rechargeable) batteries are sold.

You thus full your statutory obligations and contribute to the protection of the environment.

TECHNICAL DATA

Input voltages ............................ 100 – 240 V/AC, max. 138 mA (mains operation)

12 – 13,8 V/DC, max. 550 mA (vehicle operation mode)

5 V/DC, max. 1000 mA (USB operation)

9 V/DC, max. 700 mA (battery operation)

Standby power consumption ..... max. 0.15 W

Fuse (vehicle plug) .................... Fast-acting 1 A, 250 V (6 x 32 mm)

DC output .................................. 5 V, max. 1000 mA

Dimensions (W x H x D) ............ 90 x 75 x 30 mm

Weight ....................................... approx. 140 g (without attachments)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Voltcraft 4 IN 1 MULTI Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info