• This device is constructed and tested in accordance with EN
61010-1 or EN 61010-2-32, and left the factory in a technically-
safe, perfect condition. To maintain this condition and to ensure
safe operation, it is essential for the user to observe the safety
instructions and warning notes contained in these operating in-
structions. The following symbols must be observed:
= Attention! Voltages dangerous when touched! Danger to
life
= Read the operating instructions
CAT III = Overvoltage category III
=Protection class II (double-insulated)
• The measuring instrument may be used in installations of Over-
voltage Category III (3) in accordance with IEC 664,provided that
the voltage in the circuit being measured does not exceed 1000
VDC or 750 VAC rms.
• Measuring instruments and accessories are not toys and do not
belong in the hands of children !
• In commercial facilities the accident-prevention regulations of
the industrial employers' liability association for electrical sy-
stems and equipment must be observed.
• In schools, training facilities, hobby and self-help workshops, the
handling of measuring instruments must be supervised responsi-
bly by trained personnel.
• Take particular care when dealing with voltages greater than 25
VAC or greater than 35 VDC. Even at these voltages a lethal el-
ectric shock can be received if electrical conductors are tou-
ched.
32
Coefficient de température . . . .:0,2 x la précision indiquée/K Er-
reur supplémentaire de mesure
dans la fourchette de 0 à 18°C et
28°C à 50°C
Type de batterie . . . . . . . . . . . . .:1 x 9-V-Monobloc, type NEDA
1604 ou JIS 006P ou IEC6LF22
ou identique
Durée de vie de la batterie . . . . .:env. 100 heures (avec batterie
zinc-carbone)
Hauteur de travail . . . . . . . . . . . .:max.2000 m au-dessus du ni-
veau de la mer (= max. 6562 ft
ou pieds)
Degré de pollution . . . . . . . . . . .:2 respectivement classe 2
Poids . . . . . . . . . . . . . . . . . . . . .:env. 540g (avec batterie)
Dimensions (L x l x h) . . . . . . . . .:env. 277 x 102 x 49 mm
Tolérances de mesure
Précision garantie à ±(% lecture + nombre de positions = digits =
dgt(s) )
Précision garantie pendant 1 an à une température de +23°C ±5K,
avec une humidité de l'air relative inférieure à 75 %. Le temps de
réchauffement avant usage est de : 1 minute
73
