Bedienungsanleitung Volvo XC90 - 2004 (Seite 110 von 219) (Englisch)

484473

110

Zoom out

Zoom in

Vorherige Seite

1/219

Nächste Seite

108

Starting and driving

Stability system

DSTC – Dynamic

Stability and Traction

Control

The Dynamic Stability and Traction Control

system (DSTC) comprises several different

functions:

• 7UDFWLRQ&RQWURO7&

The Traction Control function transfers

power from the spinning drive wheel to

the drive wheel which has grip by braking

the spinning drive wheel. To increase

forward traction in this situation, you may

need to depress the accelerator more than

usual. A pulsing sound is heard when

Traction Control is working. This is

completely normal. The TC function is

most active at low speeds. It cannot be

switched off.

• 6WDELOLW\&RQWURO6&

The Stability Control function is designed

to prevent the drive wheels from slipping

during acceleration by lowering

engine torque. This improves navigation

and road safety on slippery surfaces.

Under certain conditions, such as when

driving with snow chains or in deep snow

or sand, it may be beneficial to switch off

the SC function to increase traction. This

is done using the DSTC button.

• $FWLYH<DZ&RQWURO$<&

The Active Yaw Control function

automatically brakes one or more of the

wheels to stabilise the car in the event of

a skid. If you were to depress the brake

pedal in this situation, it would feel more

rigid than usual and a pulsing sound

would be heard. For reasons of safety, the

AYC function is always active and

cannot be switched off.

• 5ROO6WDELOLW\&RQWURO56&

The Roll Stability Control function

automatically brakes one or more wheels.

This stabilises the car laterally so as to

minimise the risk of overturning due to a

skid or the like. If you were to depress the

brake pedal in this situation, it would feel

more rigid and a pulsing sound would be

heard. For reasons of safety, the RSC

function is always active and cannot be

switched off.

DSTC button

The DSTC button in the centre console is used

to reduce or reactivate the DSTC system.

Reducing the system means that the Stability

Control (SC) and Active Yaw Control (AYC)

functions are reduced. Other functions are not

affected.

When the LED in the button is lit, the DSTC

system is activated (assuming there is no fault).

127(For reasons of safety, the button must

be depressed for at least one half second to

reduce the DSTC system function.

127(The LED in the button is extinguished

and "DSTC SPIN CONTROL OFF" is shown in

the display.

The DSTC system is automatically reactivated

each time the engine is started.

The warning symbol flashes when...

• The SC function works to keep the car’s

drive wheels from slipping.

• The TC function works to improve the

car’s traction.

• The AYC function works to keep the car

from skidding.

• The RSC function works to prevent the

car from overturning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Volvo XC90 - 2004 Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Volvo XC90 - 2004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info