Bedienungsanleitung Vonroc CD506DC (Seite 6 von 48) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch)

763912

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

WWW.VONROC.COM

6) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY WARNINGS FOR DRILLS

AND SCREW DRIVERS

a) Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

b) Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

c) Hold the power tool by insulated gripping surfa-

ces, when performing an operation where the

fastener may contact hidden wiring. Fasteners

contacting a “live” wire may make exposed

metal parts of the power tool “live” and could

give the operator an electric shock.

d) Hold the machine with a ﬁrm grip. High reaction

torque can brieﬂy occur while driving in and

loosening screws.

e) Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

f) Always wait until the machine has come to a

complete stop before placing it down. The tool

insert can jam and lead to loss of control over

the power tool.

g) Before any work on the machine (e. g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the direction switch

to the middle position. Unintentional actuation

of the On/Off switch can lead to injuries.

BATTERY TOOL USE AND CARE

a) Recharge only with the charger speciﬁed by the

manufacturer. A charger that is suitable for one

type of battery pack may create a risk of ﬁre

when used with another battery pack.

b) Use power tools only with speciﬁcally desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and ﬁre.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery termi-

nals together may cause burns or a ﬁre.

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, ﬂush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejec-

ted from the battery may cause irritation or burns.

SERVICE

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

FOR THE CHARGER

Intended use

This screwdriver has an integrated lithium-ion bat-

tery, which you can charge with the included USB

charging cable (USB-mains adapter not included).

The appliance is not to be used by persons (in-

cluding children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given super-

vision or instruction

b) Children being supervised not to play with the

appliance

c) Do not recharge non-rechargeable batteries!

d) During charging, batteries must be placed in a

well ventilated area!

Integrated batteries may only be removed for

disposal by qualiﬁed personnel. Opening the

housing shell can destroy the power tool.To re-

move the battery from the power tool, press the

On/Off switch until the battery is fully dischar-

ged. Unscrew the screws on the housing and

remove the housing shell in order to remove the

battery. To prevent a short circuit, disconnect the

connectors on the battery one at a time and then

isolate the poles. Even when fully discharged,

the battery still contains a residual capacity,

which can be released in case of a short circuit.

RESIDUAL RISKS

Even when the power tool is used as prescribed it

is not possible to eliminate all residual risk factors.

The following hazards may arise in connection with

the power tool’s construction and design:

a) Health defects resulting from vibration emission

if the power tool is being used over longer

period of time or not adequately managed and

properly maintained.

b) Injuries and damage to property to due to bro-

ken accessories that are suddenly dashed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc CD506DC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info