Bedienungsanleitung Vonroc DS502AC (Seite 8 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

764081

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

WWW.VONROC.COM

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2-4.

Fig. A

1. On/off switch

2. Speed adjustment wheel

3. Hinge

4. Upper handle

5. Middle handle

6. Lower handle

7. Dust hose connector

8. Dust hose

9. Dust bag

10. Clip

11. Strap

12. Sanding pad cover

13. Hinge lock

14. Telescopic extension

15. Telescopic extension connector

16. Sanding pad

17. Sanding paper

18. Hex key holder

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Assembling the foldable tube (Fig. B)

1. Fully unfold the telescopic tube of the drywall

sander as shown on ﬁgure B1.

2. Secure with the Hinge lock (13) as shown on

ﬁgure B2. Make sure that the Hinge lock (13) is

engaged correctly. To disassemble the foldable

tube, simply open the Hinge lock (13). Now, the

telescopic tube can be folded.

Assembling the telescopic tube (Fig. C)

1. Insert the Telescopic extension (14) into the

opening of the Middle handle (5), as shown on

ﬁgure C1. Make sure the ﬂat part of the tube

aligns with the ﬂat part of the opening.

2. Tighten the Telescopic extension connector (15)

by turning it clockwise, as shown on ﬁgure C2.

Note: the machine can also be used without the Te-

lescopic extension (14). To do so, skip this step and

assemble the dust extraction system directly into the

Middle handle (5), instead of the Lower handle (6).

Assembling the dust extraction system (Fig. D)

It is highly recommended to use the machine with

the dust hose and dust bag, ensuring optimal dust

extraction.

1. Insert the Dust hose (8) with Connector (7) into

the opening of the Lower handle (6), as shown

on ﬁgure D1. Make sure the ﬂat part of the tube

aligns with the ﬂat part of the opening.

2. Tighten the Dust hose connector (7) by turning

it clockwise, as shown on ﬁgure D2.

Note: The dust bag should be emptied when the

bag is half full to maintain optimal dust extraction.

Mounting and removing sanding paper (Fig. F)

• Hold the machine on its side or upside down, as

shown on Fig. E

• Mount sanding paper (17) with the required

grain size onto the sanding pad (16). Make

sure that the perforation in the sanding paper

(17) corresponds with the perforation on the

sanding pad (16).

• To remove the sanding paper (17), simply pull

the sanding paper from the sanding pad (16).

Note: Use coarse sanding paper for sanding rough,

uneven surfaces. Use medium sanding paper for

removing the remaining scratches from the coarse

sanding paper. Use ﬁne sanding paper for ﬁnishing

surfaces.

Replacing the sanding pad (Fig. F)

Only install the sanding pad speciﬁed by the manu-

facturer onto the machine.

Removing the sanding pad:

1. Remove sanding paper (17) from the sanding

pad (16).

2. Insert the supplied hex key into the bolt on the

sanding pad (16).

Whilst holding the sanding pad (16) ﬁrmly, turn

the wrench anti-clockwise to loosen the hex bolt.

4. The sanding pad (16) now can be removed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc DS502AC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info