Bedienungsanleitung Vonroc HA502AC (Seite 7 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

764013

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

WWW.VONROC.COM

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2 - 3

Fig. A-E

1. Switch (0/I/II)

2. Ventilations slots

3. Nozzle outlet

4. LCD digital display

4.1 Pre-set input

4.2 Flasher

4.3 Pre-set mode indication

4.4 Temperature indication

4.5 Air ﬂow indication

5. Storage button

6. Mode Selection button

7. Adjustment button for temperature-

8. Adjustment button for temperature+

9. Adjustment button for air ﬂow +

10. Adjustment button for air ﬂow -

11. Flat rear side

12. Fishtail nozzle

13. Reduction nozzle

14. Glass protection nozzle

15. Spoon reﬂector nozzle

16. Scraper

3. OPERATION

The Hot air gun can be used for:

• Plumbing work like tube connections, solder,

bowing tubes;

• Removing paint, varnish and lacquer without

ﬁrerisk;

• Quickly drying of appliances which have beco-

me wet;

• Drying surfaces for quick repairing;

• Removing self-adhesive labels in a clean way

placing PVC labels;

• Blistering after sticking PVC materials can be

smoothed after heating;

• Easy removing of vinyl carpeting:

• Forming all synthetics with a low temperature

(400 degrees) among which polyethylene and

PVC;

•

Forming all synthetics with a high temperature

(600 degrees) among which acryl and plexiglass;

• Smelting synthetics, among which matters and

foils with PVC layer;

• Applying heat shrinking tubes;

• Shrinkwrappers;

• Thawing tubes and engines;

• Repairing ﬁnishing layers: enamel of bath and

household appliances; applying epoxypowder

coverlayers;

• Repairing of ski’s, surf-boards and other sports

goods;

•

Unscrewing too fast ﬁxed screws and connections.

Operation (Fig. A)

You can work manually with this hot air gun or you

can put it in a vertical position.

• Check if the mains switch is on position “0”

before you connect the apparatus;

• Keep the main lead always away from the hot

air stream and the mouth piece;

• Put the mains switch in position ‘I or II’ to let

your hot air gun operate:

"I" = 50 degrees, air ﬂow 250-500 l/min.

“II” = 50-650 degrees, air ﬂow 250-500 l/min.

“0” = Off

Temperature and airﬂow settings (Fig. B)

• Turn switch to I or II, and the heat gun will start.

• Turn switch to II.

- Select the desired temperature range using

the adjustment buttons (7, 8).

- The temperature can be adjusted in 10°C

increments from 50°C - 650°C.

- The ﬂasher (4.2) will keep ﬂashing before

the output temperature reaches the desired

temperature.

- Select the desired air ﬂow level using the

adjustment buttons (9, 10).

• Turn switch to I, the temperature is ﬁxed at

50°C for cooling down.

Pre-set mode selection (Fig. B, C, D)

•

4 pre-set modes are available for quick selection

of temperature and airﬂow setting for most

frequent and deﬁned applications.

- Turn on the tool.

- Click the mode selection button (6) to select

one of available pre-sets.

Pre-set mode input (Fig. B, C, D)

• Select one pre-set mode (see pre-set mode

selection)

• Set desired temperature and airﬂow by clicking

buttons (7, 8, 9, 10)(see temperature and

airﬂow settings).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc HA502AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info