Bedienungsanleitung Vonroc LL501DC (Seite 8 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

764066

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

8WWW.VONROC.COM

exceeded. Position the device horizontally. After

it self-levels, the difference must not exceed ±

2.5 mm. When it’s more than 2.5mm apart, a

calibration check is necessary.

Calibration check (Fig. A, F)

The accuracy of the horizontal beam can be

checked by following these steps:

1. Set the device on a tripod, centered in a room

with walls ideally 5 meter away.

2. Slide the lock switch (2) to the left to switch the

device on. The operating mode button (1) is illu-

minated in green. If the operating mode button

(1) is illuminated in red and the laser ﬂashes,

the permissible inclination range of 5 degrees is

exceeded. Position the device horizontally.

3. After it self-levels, make a horizontal mark on

the wall anywhere along the horizontal line to

indicate the height of the beam. Label this as

point A as shown in Fig. F1.

4. Turn the device 180°, and after it self-levels,

mark point B as shown in Fig. F2.

5. Turn the device 180°. Position the device as

near as possible to the wall at the height of

point A as shown in Fig. F3.

6. Turn the device 180°, and after it self-levels,

mark point C. This mark should either be direct-

ly above, below or on top of point B as shown in

Fig. F4. The difference between points B and C

is the tolerance.

When B and C are more than 0.8 mm/ m apart, an

adjustment is necessary. Contact your authorized

dealer or else the Vonroc Service Department.

Cleaning

NOTICE! Risk of product damage! Never

submerge device in water while cleaning.

Do not use cleaning agents or solvents. Wipe the

device using a dry cloth.

Storage

NOTICE! Risk of product damage! Always

handle measuring instruments with care.

• Store the product in a dry, well-ventilated place.

• Only store and transport the product in its origi-

nal packaging.

• Prevent large temperature ﬂuctuations: Always

temper the product for a while before use in

extremely cold or hot environments.

Taking out of operation for a longer period of time

• When not in use for a longer period of time,

remove the batteries.

NOTICE! Risk of product damage! Old, leaky

batteries can damage the product. Check

the battery regularly.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/

EC for Waste Electrical and Electronic Equipment

and its implementation into national right, power

tools that are no longer usable must be collected

separately and disposed of in an environmentally

friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

beyond the face hereof, herein, including the im-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc LL501DC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info