Bedienungsanleitung Vonroc LM505DC (Seite 15 von 162) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

819204

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

WWW.VONROC.COM

•

When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the CD802AA charger

(Fig. K)

1. Take the battery (23) from the machine.

Turn the battery (23) to upside down position and

slide it onto the charger (26) as shown in Fig. K.

3. Push the battery until it is fully pushed into the

slot.

Plug the charger plug into an electrical outlet and

wait for awhile. The LED indicators on the charger

(27) will lighten up and show the charger status.

The charger has 2 LED indicators (27) which indicate

the status of the charging process:

Red LED

Status

Green LED

status Charger status

Off Off No power

Off On

Standby mode:

- No battery is inserted or,

- Battery inserted but

charging has ﬁnished

On Off Battery charging in progress

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the charg-

er plug from the outlet and remove the battery from

the charger.

When the machine is not being used over

alonger period of time it is best to store the

battery in charged condition.

Charging the battery with the CD820AA dual

charger (Fig. L)

1. Take the battery (26) from the machine.

2. Turn the battery (26) to upside down position

and slide it onto the charger (30) as shown in

Fig. L.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for awhile. The LED indicators on the

charger (31, 32, 33) will lighten up and show

the charger status.

The charger has 6 LED indicators (31, 32, 33)

which indicate the status of the charging process:

Item Conditions LED colour

Red Amber Green

Stand by Power on On On On

Charging Started charging

(10-19V DC±0.5V DC) Blink Off Off

Halfway charging

(19-20V DC±0.5V DC) On Blink Off

Finished charging

(20-21V DC±0.5V DC) On On Blink

Fully

charged

Trickle charging

≤300±150mA On On On

Stop charging

High tem-

perature

High-temperature

protection of the

battery works

On On On

• Fully charging the 4Ah battery may take up to

85 minutes.

After the battery is fully charged remove the charger

plug from the outlet and remove the battery from the

charger.

When the machine is not being used over

alonger period of time it is best to store the

battery in charged condition.

Assembling the lower handle (Fig. A, B)

1. Mount the lower handle (14) onto the lawn

mower body, as shown on ﬁgure B.

2. Put the washer (34C) onto the bolt (34B).

3. Screw the handle adjustment knob (34A) onto

the bolt (34B) with assembled washer and

secure the handle by closing it.

4. Repeat these steps for the other side.

Assembling the upper handle (Fig. A, C, D)

1. Attach the upper handle (1) to the lower handle

(14).

2. Secure the upper handle (1) by inserting the

bolts (15B), washers (15C) and handle knobs

(15A) as shown on ﬁgure C.

3. Fixate the cable to the handle by using the

cable holders (6), as shown on ﬁgure D.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc LM505DC Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info