Bedienungsanleitung Vonroc LM505DC (Seite 16 von 162) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

819204

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

WWW.VONROC.COM

Assembling and mounting the grass box

(Fig. A, E, F, G, H)

The lawn mower shall not be operated

without either the entire grass catcher or

the guard in place.

It is possible to use the lawn mower with or without

grass box. Remember though that when cutting

without the grass box, the grass box lid (11) must

be lowered. Do not operate the mower with outlet

lid lifted.

1. Mount the Grass box carrying handle (16) onto

the grass box cover (12), as shown on ﬁgure E.

2. Mount the grass box cover (12) onto the grass

box bag (10), as shown on ﬁgure F.

Ensure the notches are properly inserted until

aclicking noise can be heard, as shown on ﬁgure

Lift the grass box lid (11) and attach the assem-

bled grass box onto the lawn mower, as shown on

ﬁgure H. Ensure the indents in the grass box align

properly with the holders of the lawn mower body.

Note: the grass box is ﬁtted with agrass level

indicator (13), which shows the amount of mowed

grass. As long as the grass box is not full, the indi-

cator will be opened. When the grass box is full, the

indicator will close. In that case immediately stop

mowing and empty the grass box. This indicator is

only arough guideline, of which the functionality

depends on the condition inside the grass basket.

Replacing the cutting blade (Fig. A, M)

Before any work on the power tool, remove

the battery.

When replacing the cutting blade, wear

protective gloves. Danger of injury when

touching the cutting blade.

Only use blades that are recommended by

the manufacturer.

1. Remove the grass box.

2. Turn the mower onto its side.

3. Firmly hold cutting blade using protective gloves.

4. Turn the cutting blade ﬁxing screw counterclock-

wise to loosen it, as shown on ﬁgure M.

5. Replace or sharpen the cutting blade.

6. Install the cutting blade, use the above pro-

cedure in reversed order (holes in the cutting

blade must be seated on the spindle pins).

7. It is best to entrust sharpening or replacement

of cutting blade to aqualiﬁed person. Only orig-

inal parts should be used. All defects should be

repaired by service workshop authorized by the

manufacturer.

4. OPERATION

Before using, always visually inspect to see

that the blades, blade bolts and cutter

assembly are not worn or damaged. Please

remove the battery from the tool. Replace

worn or damaged blades and bolts in sets

to preserve balance.

If the machine starts to vibrate abnormally

(check immediately):

- inspect for damage,

- replace or repair any damaged parts,

- check for and tighten any loose parts.

Immediately switch off the machine in the

following cases:

- whenever you leave the machine,

- before clearing blockages or unclogging

chute,

- before checking, cleaning or working on

the machine,

- after striking aforeign object. Inspect the

machine for damage and make repairs

before restarting and operating the ma-

chine;

Be careful during adjustment of the

machine to prevent entrapment of the

ﬁngers between moving blades and ﬁxed

parts of the machine.

Adjusting the cutting height (Fig. A, I)

Switch off the equipment, wait for the blade

to stop and remove the battery. There is

arisk of injury.

Depending on the preferred cutting height, you

can adjust the heigh level in one of ﬁve positions.

Adjust the cutting height according to the needs of

your lawn. The cutting height depends on the kind

of lawn and its actual height. When mowing high

grass, start with the maximum cutting height and

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc LM505DC Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info