Bedienungsanleitung Vonroc LR501DC (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

764124

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

WWW.VONROC.COM

• If desired, multiple colours can be used to

repair a damage.

Tip! Always build up the colour from light to

dark.

• For larger or deep damaged areas, it is recom-

mended to combine the transparent wax (K)

together with the chosen base colour in order

to create a better matching result.

Melting the Wax (Fig. D)

• Turn the device on like mentioned in “switching

the device On/Off”.

• Melt a small amount of wax by using the wax

melting tip (2) and transfer to wax to the dam-

aged area.

Risk of burns! Avoid skin contact with the

device and protect yourself from dripping

wax!

Filling the damaged area (Fig. E)

• Fill the damaged area with wax layer by layer

until the area is completely ﬁlled with wax.

Make sure there is a slightly excessive amount

of wax used. The redundant wax will be scraped

off, as explain in “ﬁnishing and ﬁne matching”.

• For vertical surfaces it is advisable to mix the

colour beforehand and apply quickly with the

scrapper.

Finishing and ﬁne matching (Fig. F - H)

• Allow the wax to cool for a few seconds for

small damaged areas.

• The cool down time depends on the size and

depth of the damaged area.

• With light pressure carefully remove excessive

wax with the ribbed side of the ﬂattening scrap-

er (9). Repeat this several times in different

directions.

• Wipe the abrasive sponge (10) over the ﬁlled

area to degrease the surface.

When repair of the damaged area is done

always switch off the device and place the

protection cap back on the device.

5. MAINTENANCE

Cleaning (Fig. I)

• The ﬂattening scraper (9) can be cleaned with

the serrated edges of the cleaning scraper (8).

• Clean the wax melting point (2). Residue must

be removed.

• Let the melting tip cool before placing the pro-

tection cap back on the device.

NOTICE! Risk of product damage! Never

submerge device in water while cleaning.

Do not use cleaning agents or solvents. Wipe the

device using a dry cloth.

Changing the batteries

• Open the battery compartment (7).

•

Place batteries. Pay attention to correct polarity!

• Close battery compartment.

Storage

NOTICE! Risk of product damage!

• Store the product in a dry, well-ventilated place.

• Only store and transport the product in its origi-

nal packaging.

Taking out of operation for a longer period of time

• When not in use for a longer period of time,

remove the batteries.

NOTICE! Risk of product damage! Old, leaky

batteries can damage the product. Check

the battery regularly.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EU

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc LR501DC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info