Bedienungsanleitung Vonroc S2_LM504DC (Seite 13 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

778578

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

WWW.VONROC.COM

Checking the battery charging status (Fig. K)

• To check the battery charge status, push the

button (24) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more char-

ge the battery has left.

• When the lights are not burning it means the

battery is empty and must be charged immedia-

tely.

Charging the battery with the CD802AA charger

(Fig. K)

1. Take the battery (23) from the machine.

2. Turn the battery (23) to upside down position

and slide it onto the charger (26) as shown in

Fig. K.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for a while. The LED indicators on the

charger (27) will lighten up and show the char-

ger status.

The charger has 2 LED indicators (27) which indi-

cate the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁnished

On Off Battery charging in

progress

• Fully charging the 2Ah battery may take up to

60 minutes.

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the char-

ger plug from the outlet and remove the battery

from the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

Charging the battery with the CD820AA dual

charger (Fig. L)

1. Take the battery (26) from the machine.

2. Turn the battery (26) to upside down position

and slide it onto the charger (30) as shown in

Fig. L.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for a while. The LED indicators on the

charger (31, 32, 33) will lighten up and show

the charger status.

The charger has 6 LED indicators (31, 32, 33)

which indicate the status of the charging process:

Item Conditions LED colour

Red Amber Green

Stand by Power on On On On

Charging Started charging

(10-19V DC±0.5V DC) Blink Off Off

Halfway charging

(19-20V DC±0.5V DC) On Blink Off

Finished charging

(20-21V DC±0.5V DC) On On Blink

Fully

charged

Trickle charging

≤300±150mA On On On

Stop charging

High tem-

perature

High-temperature

protection of the

battery works

On On On

• Fully charging the 2Ah battery may take up to

45 minutes.

• Fully charging the 4Ah battery may take up to

85 minutes.

After the battery is fully charged remove the charger

plug from the outlet and remove the battery from the

charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S2_LM504DC Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info