Bedienungsanleitung Vonroc S2_LM504DC (Seite 15 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

778578

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

WWW.VONROC.COM

Immediately switch off the machine in the

following cases:

- whenever you leave the machine,

- before clearing blockages or unclogging

chute,

- before checking, cleaning or working on

the machine,

- after striking a foreign object. Inspect

the machine for damage and make re-

pairs before restarting and operating the

machine;

Be careful during adjustment of the

machine to prevent entrapment of the

ﬁngers between moving blades and ﬁxed

parts of the machine.

Adjusting the cutting height (Fig. A, I)

Switch off the equipment, wait for the blade

to stop and remove the battery. There is a

risk of injury.

Depending on the preferred cutting height, you

can adjust the heigh level in one of ﬁve positions.

Adjust the cutting height according to the needs of

your lawn. The cutting height depends on the kind

of lawn and its actual height. When mowing high

grass, start with the maximum cutting height and

make a second cut with a lower cutting height.

A higher cut height should always be selected for

the ﬁrst cut of the season.

1. Pull the height adjustment lever (17) outwards

(away from the machine housing) as shown on

ﬁgure I.

2. Whilst holding the height adjustment lever (17)

in outwards position, push it forward or bac-

kward to the desired cutting height.

3. Release the lever (17) and ensure it engaged in

the slot properly.

NOTE: There are 5 cutting height levels available:

30mm, 40mm, 50mm, 60mm, 70mm.

Switching the machine on/off (Fig. A, N)

Before starting, put the product on a ﬂat

surface free of high grass.

Clean the underside of the deck before

turning on the machine.

Keep your feet well away from the cutting

blade.

Do not tilt the product when starting the

motor.

1. Ensure the safety key (21) is inserted in the

designated spot underneath the battery cover

(19).

2. To start the machine, press and hold the safety

button (3) and press the on/off switch (2).

Whilst holding the on/off switch (2), you can

release pressure on the safety button (3).

3. To stop the machine, release the on/off switch

(2) and wait until cutting blade stops rotating.

Operating the mower (ﬁg. A, O)

Always ensure that a safe distance

(provided by the length of the long handles)

is maintained between the user and the

mower housing.

Be especially careful when mowing and

changing direction on slopes and inclines.

Maintain a solid footing and wear sturdy,

non-slip footwear and long trousers. Always

mow along the incline (not up and down).

For safety reasons, the lawn mower may

not be used to mow inclines whose

gradient exceeds 15 degrees.

Use special caution when backing up and

pulling the lawn mower. Tripping hazard!

Before use

• Make sure that the lawn is clear of stones,

sticks, wire or other objects that could damage

the product or its product.

• Do not cut wet grass because it tends to stick

to the underbody of the product, preventing

the proper discharge of grass clippings, and it

could also cause you to slip and fall.

• Never cut off more than one-third of the total

length of the grass for a healthy lawn. In the

autumn, lawns should only be cut as long as

there is growth.

• Slowly push the product forward, do not force.

• Mow in slight overlapping rows. The most effec-

tive hat all the lawn is cut without missing any

spots, as shown on ﬁgure O.

• Circle around ﬂower beds. When reaching a

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S2_LM504DC Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info