Bedienungsanleitung Vonroc S_OT501DC (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

778554

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

WWW.VONROC.COM

e) Do not use a battery pack or tool that is dama-

ged or modiﬁed. Damaged or modiﬁed batteries

may exhibit unpredictable behaviour resulting in

ﬁre, explosion or risk of injury.

Do not expose a battery pack or tool to ﬁre

or excessive temperature. Exposure to ﬁre or

temperature above 130 °C may cause explosion.

NOTE The temperature „130 °C“ can be replaced

by the temperature „265 °F“.

Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range speciﬁed in the instructions.

Charging improperly or at temperatures outside

the speciﬁed range may damage the battery and

increase the risk of ﬁre.

6) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY WARNINGS FOR

MULTITOOLS

Contact with or inhalation of dust coming

free during use (e.g. lead-painted surfaces,

wood and metal) can endanger your health

and the health of bystanders. Always wear

appropriate protective equipment, such as

a dust mask. Always use proper dust

extraction during use.

• Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

• Do not work metal with a magnesium content of

more than 80%.

• Be very careful when working painted surfaces.

• Do not use accessories which are not spe-

ciﬁcally designed and recommended by the

manufacturer. Risk of personal injury.

• Inspect the machine and the accessories before

each use. Do not use accessories which are

bent, cracked, or otherwise damaged. If the

machine or one of the accessories is dropped,

inspect the machine or the accessory for dama-

ge. If necessary, replace the accessory.

• Only use accessories that are recommended by

the manufacturer.

• Only use accessories that are suitable for the

application.

• Only use accessories with the correct dimensi-

ons.

• Do not use accessories that require liquid cool-

ants. Risk of electric shock.

•

Make sure that the accessories are properly

mounted. Do not use adapters or other aids to

mount accessories with another spindle diameter.

• Make sure that the maximum speed for the

accessory is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

• Let the machine run at no load in a safe area

after mounting the accessories. If the machi-

ne vibrates strongly, immediately switch off

the machine, remove the mains plug from the

mains, and try to solve the problem.

• Make sure that the workpiece is properly sup-

ported or ﬁxed.

• Wear safety goggles. Wear hearing protecti-

on. Wear a dust mask. If necessary, use other

protective means, such as safety gloves, safety

shoes, etc. Risk of personal injury.

• Keep bystanders away from the work area.

Make sure that all persons in the work area

wear protective equipment. Risk of personal

injury.

• Keep the mains cable away from the rotating

accessory. If the mains cable touches the rota-

ting accessory, your hands or arms may come

in contact with the accessory. Risk of personal

injury.

• Hold the machine by the insulated gripping

surfaces where the accessory may contact hid-

den wiring or the mains cable. If the accessory

contacts a ‘live’ wire, the exposed metal parts

of the machine can also become ‘live’. Risk of

electric shock.

• Do not use the machine while carrying it at your

side. Risk of personal injury.

• Do not use the machine near ﬂammable materi-

als. Risk of ﬁre.

• Beware that the accessory continues to rotate

for a short period after switching off the machi-

ne. Do not attempt to bring the accessory to a

standstill yourself.

• Never put the machine down on a table or a

workbench before it has been switched off.

• Regularly clean the ventilation slots. Risk of

electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S_OT501DC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info