Bedienungsanleitung Vonroc S_PM501AC (Seite 7 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

778354

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

WWW.VONROC.COM

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2.

1. On/off switch

2. Rear handle

3. Lock-on button

4. Speed adjustment wheel

5. Front handle

6. Velcro pad holder

7. Polishing pad

8. Hex bolt

9. Hex key

10. Spindle

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Mounting and removing accessories (Fig. A, B)

Make sure to use the right accessory for the

corresponding material. Use undamaged polishing

tools only.

Velcro pad holder

1. Place the machine on its back.

2. Place the velcro pad holder (6) on the spindle

(10).

3. Place the hex bolt (8) and tighten the bolt with

the hex key (9).

Polishing pads

1. Place the machine on its back.

2. Firmly press the polishing pad (7), centred on

the eye, onto the Velcro pad holder (6).

To remove a pad (7), simply pull the pad from the

Velcro pad holder (6).

4. OPERATION

Switching on and off (Fig. A)

• To switch on the machine, press the on/off

switch (1).

• To switch the machine to continuous mode,

keep the on/off switch (1) pressed and simulta-

neously press the lock-on button (3).

• To switch off continuous mode, press the on/off

switch (1) again.

• To switch off the machine, release the on/off

switch (1).

Only lay the machine down once the motor

has completely stopped turning. Do not put

the machine on a dusty surface. Dust

particles can penetrate the machine.

Speed control (Fig. A)

The speed of the disc can be controlled with the

rotary knob (4) on top of the handle. The higher the

position, the higher the speed. When using wax on

the polishing pad do not start at a high speed.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S_PM501AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info